2 In1 Fertility Tester Moisture Light Test Meter Kit For Garden Plant Flower

2 in1 Fertility Tester  Moisture Light Test Meter Kit For Garden Plant Flower

Feature:

100% brand new and high quality .

Are you sick of your plants dying? Fed up of being surrounded by wilting and brown-leaved specimens? If so, the problem could be with your , and so, what you need is this moisture, pH and light meter with easy to read scale. Your plants never need fear that you’re going to mistreat them again with this easy to use and scientifically accurate measuring device.

Needing no batteries the prongs measure the moisture and pH content of the from level and determine whether your plants are ideally situated with regards to their positioning. The moisture meter works with all types and is suitable for use in or out doors - simply place it in the , set to the setting you wish to measure and read the scale.

4 functions in one compact meter - measure the moisture and pH content of the and the environmental light.

Scientifically accurate.

Easy-to-read scale indicator.

Incredibly to use - just stick it in the .

Works with house and garden plants.

Promotes healthy plants.

Color:green

Size: 180×60×30mm

1. Instructions for use: How to analyze fertility 1. Remove the top about 5 cm first; then mash the down to 13 cm deep. And clean up all organic impurities in the that will affect the test results, such as leaves, , etc. 2. Soak the with water and form a mud. 3. Wipe the probe with a clean cotton or paper towel. 4. Move the function key to the first gear from the left. 5. Insert the probe into the to be measured until the distance between the and the body does not 2.5 cm. Wait 10 seconds and read the data after the pointer is stable. 6. Record the data. Remove the probe from the and clean the probe thoroughly. The judgment of the analysis result are as follows Lack of (TOO LITTLE) Nitrogen less than 50 ppm Phosphorus less than 4 ppm Potassium less than 50 ppm Ideal range (IDEAL) 50-200 ppm 4-14 ppm Overdose (TOO MUCH) Greater than 200 ppm Greater than 14 ppm · Unit ppm: parts per million If the analysis result shows "TOO LITTLE" means: lack Please use suitable liquid fertilizer for the different plants you plant to supplement the crops with nutrients. (Specifically refer to the instructions on the fertilizer packaging bag) If the analysis result shows "IDEAL" means: ideal According to the different plants you plant, use suitable fertilizers and apply them once a month in combination with irrigation. If the analysis result shows "TOO MUCH" means: excessive 1. Watering a lot, diluting and washing excess nutrients; 2. For potted plants, they should be replanted into new ; 3. Do not apply any chemical fertilizers, but you can add manure, compost, plant residues, leaves, and other organic substances to the . How to analyze pH 1. First remove about 5 cm of top from the measured ; then mash the down to a depth of 13 cm. And clean up all organic impurities in the that will affect the test results, such as leaves, , etc. 2. Soak the with water and form a mud. (It is best to use rain or distilled water) 3. Move the function key to the rightmost gear. 4. Wet the probe. Clean the rightmost of the three probes with a clean cotton pad. 5. Fully insert the probe into the under test. 6. Wait 1 minute to read the data. 7. After the test, wipe the probe clean and dry. Special Note Please do not insert the probe into the for a long time, or use this device to test the liquid, so as not to damage it.

Label: Yes

Material: Plastic