---------------------------------------------------
【Voltage Compatibility】
Our products are selected to support international voltage ranges (e.g. 100–240V).
However, please make sure your local voltage is compatible before use, as incorrect voltage may still cause malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without appropriate voltage or equipment.
---------------------------------------------------
The strongest in the 30mm class*, powerful drilling and overwhelmingly low vibration with AVT. *As of March 2022, according to Makita research, for 30mm class rechargeable hammer drills (SDS plus shank). Larger and more powerful, equipped with a high-power brushless motor. Constant speed control. The rotation speed does not decrease easily even under load, allowing for stable drilling.
Overwhelmingly low vibration "AVT" Two counterweights reduce vibration. In addition, the vibration-proof handle + vibration-proof side grip reduces the vibration transmitted to the hand, reducing the burden on the user during continuous drilling work. Vibration 3-axis composite value Hammer drill 9.1m/s2 (Hammer 8.0m/s2) * Hammer drill and hammer are measured based on the EN60745-2-6 standard. Reduced swinging.
The acceleration sensor detects the swinging during bit lock and "automatically stops the motor." *Please hold the unit securely while working. If the unit is swung around and the specified acceleration is not met, this function will not work. Protected from dust and rain, dustproof and waterproof protection rating IP56*. *Products with IP markings are designed to be less susceptible to the effects of dust and water, but do not guarantee that they will not break down. Except when a dust collection system is installed.
DC 36V (40Vmax), sliding Li-ion battery specification. Battery and charger included. Drilling capacity: Concrete 30mm/Ironwork 13mm/Woodwork 32mm/Core bit 80mm/Diamond core bit 80mm. Rotation speed: [rpm] 0-840. Impact number: [rpm] 0-4,500. Work volume per charge (approximate) Concrete drilling: 10.5mm deep 60mm approx. 110 holes/Concrete drilling: 16mm deep 60mm approx. 60 holes (φ20mm: approx. 35 holes) (Concrete compressive strength 40MPa/When BL4040 is installed)
Total length: Length 422mm x Width 97mm x Height 242mm (BL4040, with side grip attached, without bit or stopper pole attached). Weight: 5.2kg (BL4040 attached, without side grip or stopper pole attached)
