Flux-Cored Aluminum Electrode Professional Rods Wire Solution Welding

feature:

. Wide range of applications-suitable for alloys with high welding or surfacing strength, good forgeability good resistance. 2. High-quality materials-made of aluminum, non-, tasteless . 3. No need for solder powder-no need to use other flux powder with aluminum alloy as the core coating as the base. 4. Application-including welding filler wire flame metalized welding wire. It is also used for argon welding filling materials of pure aluminum, for connection with aluminum busbars guide rods in electrolytic aluminum plants, as well as power, , food other industries. 5. Perfect welding effect-Because the product is solid, has good weldability resistance, has high thermal conductivity, high electrical conductivity excellent processing performance, the design has a full smooth welding effect.

Specification:

Material: Aluminum Quantity: 50pcs Length: 33cm Diameter: .6mm/0.06inches

usage:

. Clean polish the physical . 2. Heat the of the metal material until the temperature of the wire reaches the working temperature of 380°C to 400°C. 3. When repairing thin aluminum, heat the aluminum base material to a suitable working temperature, then use the welding wire to friction melt to form a weld. 4. Small parts are welded with propane gas, large parts are heated welded with industrial gas or induction heating device, they are naturally cooled after welding.

Please note:

. The thicker the sheet, the harder it is to heat, so it is important to use a reasonable heat source. 2. As long as the temperature of the base metal reaches the working temperature of the welding wire, welding can be started. 3. When using oxyacetylene welding, neutral flame welding should be used, but please do not burn the welding wire directly. 4. Applicable heat source: such as propane, oxyacetylene, . 5. Storage: Please store in a dry ventilated place. . The of the base metal must be clean. 7. The temperature of the base metal should reach 400 degrees Celsius, including the temperature of the base metal during the welding process should be maintained at 400 degrees Celsius, the temperature can be high or low. 8. Due to the difference in lighting and screen settings, the actual color of the product may be slightly different. 9. As manual measurement is different, please allow slight size differences. 10. Professional use is strongly recommended.

The package includes:

50PCS aluminum electrode

notes:

. The actual color of the product may be slightly different from the website picture due to various factors such as the brightness of the display and the brightness of the light. 2. Please allow the data to have a slight deviation from manual measurement.