FLEX sprung slats frame for a 160x200 bed
The bed frame is a part of it that, contrary to appearances, has a big impact on how we will sleep.. It affects not only the condition of the mattress, but can also be a very comfortable addition to the entire structure.
FLEX elastic wooden frame:Fits standard bed sides. Suitable for all types of mattresses. Easy to assemble, durable and comfortable. Made from layered glued beech slats, profiled in a slight arc to increase mattress comfort and elasticity. Resin-coated on both sides. Consists of two rows of slats connected by high-strength synthetic straps, ensuring even and durable distribution of slats on the bed frame. Includes plastic caps for the slats to prevent squeaking.
A flexible frame of the flex type is an improved version of the classic construction. The strips are appropriately profiled, thanks to this they bend gently under pressure. For increased strength, the strips are made by gluing wood in layers. Strip dimension:width: 53 mm thickness: 8 mm length: 795 mm
The offered set includes two independent frames, each 1950 mm long and 795 mm wide. (measured without plastic covers).The kit consists of:two frames consisting of 17 slats each, the slats in the frames are connected with synthetic straps, 68 caps, 8 screws. It is intended for mattresses with dimensions 160x200 cm.
A great advantage of this slatted base is that it takes the body's weight off the mattress, which is thus relieved.. This extends its lifespan.
The visible assembly method is presented using the example of a frame consisting of 23 slats.
Unfolded frame (the first and last strip) screw in the screw in the place marked on the drawing. This will prevent the frame from moving.
The frame requires support along the entire length of the side rails and along the entire length of the central part, a bed frame is required.
We include standard caps with the frame (NA2) visible in the photo below. They are intended for a bed frame no wider than 24 mm.
If you have a wider frame, we recommend caps (NA3) shown in the photo below. When assembling the frame with these caps, the first and last strips should be drilled and attached to the frame using the screws provided in the set.
Please inform the seller about changing the attachments by entering this information in "Notes to the seller".. In the absence of such information, we will send standard caps (NA2).
Delivered from Poland
No-delivery refund
