Industrial Mold Taper Positioning Column With Bevel Location Pin Accurate Locator Tool For Injection Die Assembly Consistent Results

Description: Manufactured from S136 stainless steel for maximum rust and wear protection. Features overall super vacuum heat processing, attaining stable hardness between HRC56-60. Maintains high concentricity (≤0.003 for singles, ≤0.008 for sets). Offers superior matching accuracy and consistent interchangeability. Has a smooth finish with RA values up to 0.4. How to Assemble: First Method: Machine template holes to a depth of H=(L+0.5)+0.02. Use 0.01mm interference for steel, 0.025mm for aluminum. Step 1: Firmly install the guide sleeve until it reaches the bottom. Step 2: Insert and align the guide post parallel to the template join surface. Step 3: Combine the upper and lower templates, check joint gaps, secure if pass. Adjust guide post as needed for correct alignment. Second Method: Template holes should be made to H=(L+0.5)-0.03. Keep same interference. Step 1: Place and fasten the guide post. Step 2: (1) Attach sleeve to post, measure (H1); (2) Grind sleeve so h=(H1–H); (3) Install and secure sleeve. Step 3: Finalize mold assembly, confirm joint line. Technical Data: Product: A1 Series Taper Position Pin Material: Stainless Steel Measurements: See attached image. Finish: Silver Packing List: 1x box of staples (box design sent at random) Attention: 1. Product images not to scale, refer to size details. 2. Manual measurement may cause small differences. 3. Monitors may affect item color display. The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.