• [Target vehicle] General purpose (DC12V only) *Small vehicle recommended
• A compact body is used for the highly visible LED fog lamp, which allows you to switch the emission color and has cut lines to reduce glare. LED fog lamp: 10W 1 piece
• To use the white/yellow switching function of this product, it is necessary to install an ON/OFF push switch with an indicator lamp made by SP Takegawa at the same time.
• For DC12V vehicles only. Even if it is a 12V vehicle, it cannot be used for alternating current (AC12V) or pulsating current.
A compact body has been adopted for the highly visible LED fog lamp, which allows the emission color to be switched and has a cut line to reduce glare.
LED fog lamp: 10W 1 piece
Compatible models:
General purpose (DC12V only)
*Small vehicle recommended
Details
By using it as an auxiliary lamp for normal headlights, it improves visibility when driving and increases safety when driving at night. In addition, by using cut lines in the fog lamps, you can drive with consideration given to glare from oncoming cars and surrounding pedestrians. Furthermore, by adopting a compact body with a smaller LED fog lamp body, it can be easily installed in a limited space.
A waterproof cooling fan is built inside the main body, so it efficiently cools the fog lamp body even when the vehicle is stopped or in windless conditions.
This product is equipped with a white/yellow switching function, so by purchasing SP Takegawa's "ON/OFF push switch with indicator lamp" separately, you can switch the emitting color.
The yellow luminescent color has a low reflectance against rain and fog, so it can be used as a fog lamp that responds to changes in climate.
Usage example: Set the Hi side as the normal optical axis "white" and use the Lo side as "yellow".
The adoption of high-brightness LED fog lights increases the vehicle's presence at night, making it easier to be recognized by other riders and vehicles, and contributing to accident prevention.
This product has a 10W specification for small vehicles.
Can be used for many DC12V vehicles
The power cord length is set to be approximately 600 mm to increase the freedom of installation location.
General-purpose stay included
You can change the position of the fixing screw by switching the stay back and forth.
Precautions
For DC12V vehicles only.
Even if it is a 12V vehicle, it cannot be used for alternating current (AC12V) or pulsating current.
Giboshi installation processing is required.
To use the white/yellow switching function of this product, you will need to install an ON/OFF push switch with an indicator lamp made by SP Takegawa at the same time.
منتج من اليابان 
استرداد غير متعلق بالتوصيل
