IP68 Solar Powered COB LED Neon Strip Light 24V 320LEDs/m High Density Flexible Ribbon Remote Control 1-10m Outdoor Garden Lamp

Number of Lights : ＞18 High-conrned chemical : None Installation Method : Assembly Control Method : Remote Size : 10m Features : IP68 Waterproof, Solar powered Is Batteries Included : Yes Model Number : IP68 Solar Powered COB LED Neon Strip Light Base Type : None Power Sour : SOLAR

: Mainland China Style : Modern Style Is Bulbs Included : Yes Voltage : 24v Light Sour : LED bulbs AHADA rtification : , Is Dimmable : Yes Solar ll Type : Lithium battery Protection Level : IP68 Body Material : ABS Use : HOLIDAY

Note:

Some LED strips of different lengths are equipped with solar panel controllers of different powers 0.5m/ 1m/ 2m Strips with 1.3W 1200MAH solar panel controller + remote control(no battery) 3m/ 4m/ 5mStrips with 2.8W 2400MAH solar panel controller + remote control(no battery) 6m/ 7m/ 8m/ 9m/ 10m Strips with 6W 7200MAH solar panel controller + remote control(no battery)

Specification:

-Item: Solar Powered IP68 Waterproof COB LED Neon Strip Light -Color Temperature: Warm white(3000-3500K)/ Natural white(4000-4500K)/ White(6000-6500K)/ Red/ Blue/ Green/ Golden Yellow/ I Blue/ Pink/ Purple

-Lamp Beads: COB -LED Quantity: 320LEDs/M -Working Voltage: DC24V -Strips Width: 9-10mm -Cutting Size: every 5cm Can be cut at marked intervals -Waterproof Rating: IP68 Waterproof(It can used underwater, such as in fish tanks, swimming pools) -Power Supply: Solar Powered / USB Powered -2Pin (male) waterproof joint wire length: 1.2m -Length: 0.5M / 1M / 2M / 3M / 4M / 5M / 6M / 7M / 8M / 9M / 10M -CRI(RA): ＞90 -Power: 6-10W/m

Solar-Powered Light Instructions

1. Automatic Light & Charge Control (This product features a built-in light sensor):

1）During Daylight: The light will automatically turn OFF and the solar panel will charge the internal battery using sunlight. 2）At Dusk/Night: The light will automatically turn ON using the energy stored in the battery during the day.

2. Testing During Daylight:

If you need to check the Solar-Powered LED Strip Light during daylight hours.You must completely cover the solar panel (e.g., with thick cloth, or cardboard). Otherwise, the solar panel won't work to light up the LED strip. The solar panel is covered with the item while use (simulating a dark environment), the light will switch on within a few seconds.

3. Charging via USB:

The solar panel is unaffected by light during charging the product using the USB cable (connected to a power adapter). There is no need to cover it to make the light work during the day.

Installation Tips:

1.Pla the solar panel where it reives direct sunlight for maximum charging efficiency. 2. Ensure the solar panel is clean and free from shade (trees, buildings, etc.) for optimal performan.