electro-harmonix Electro Harmonix Effector Looper 720 Stereo Looper [Domestic regular product]

[Product Infomation]

Brand : ELECTRO-HARMONIX Materials : Alminium, Steel

[Product Description]

・12 minutes of stereo recording / 10 independent loops - Stop, undo/redo, reverse, 1/2 speed playback, etc. are possible by button operation. ・Uncompressed audio 24-bit A/D/A conversion (sampling rate - 44.1kHz) ・Power source: 9V battery or 9VDC center negative adapter JP9.6DC-200 (included) ・This product is a product from a distributor in Japan. Please note that parallel import products cannot be guaranteed by an agency.

Product introduction

■Product description

The compact 720 Stereo Looper provides 10 independent loops with 720 seconds (12 minutes) of stereo recording time and unlimited overdubbing.

Perfect for practice and live performance, it's an intuitive tool for guitarists.

■Specifications ・12 minutes of stereo recording possible ・10 independent loops - Stop, undo/redo, reverse, 1/2 speed playback, etc. are possible by button operation. ・Uncompressed audio 24-bit A/D/A conversion (sampling rate - 44.1kHz) ・Stereo IN/OUT improves convenience and allows simultaneous recording of two instruments, etc. ・By connecting a 3-button footswitch, you can instantly control bank UP/DOWN and undo/redo. ・Highly quiet foot switch ・Equipped with loop fade out mode ・Power source: 9V battery or 9VDC center negative adapter JP9.6DC-200 (included)

<control>

LEVEL control: Controls the output level of the loop. A dry signal maintains the same level from input to output. Also, the dry signal remains analog for all 720 seconds.

LOOP footswitch: Used to record loops, overdub, playback and stop, and undo/redo.

STOP/FX footswitch: Turns on STOP mode/FX mode. PUSH: Select either mode by pressing and holding the MODE button for 2 seconds. A dot is displayed at the bottom right of the display when in STOP mode, and no dot is displayed when in FX mode.

LOOP control/PUSH: MODE button: A rotary encoder with dual roles, and also used as the PUSH: MODE button. Three mode selections and a value of 0-9 within the mode. You can turn the mode ON/OFF by pressing the button once. When selecting a mode, the currently selected mode will be shown on the display. You can select three modes by turning the knob. (Mode: L = Loop Select / p = Loop Progress / F = Fadeout Time)

REVERSE button: Press the button to light red and play the loop in reverse.

1/2 SPEED button: Lowers the pitch of the selected loop by one octave and halves the tempo. If you overdub a loop while this mode is ON, when you return to normal mode, the overdubbed phrase will be played back one octave higher in pitch and at twice the tempo.

This product is a product from a distributor in Japan. Please note that parallel import products cannot be guaranteed by an agency.

Attention (Disclaimer) > Please read carefully

The reference price displayed is the price assumed by the manufacturer at the time of product release.

[Important Note - For Overseas Customers]

Thank you for purchasing this product. Please read the following important notes carefully before using this product overseas.

1. Legislation and safety standards This product complies with Japanese safety standards. Please check compatibility with local regulations and safety standards before use in your country. Certain product categories (electronics, cosmetics, food, etc.) may require certification from the importing country.

2. About electrical products [Voltage compatible] When using electrical appliances, please note that they are designed according to Japanese voltage specifications (90-110V), so using them at a different voltage may cause malfunctions.

[Plug type] Our products use the Japanese plug type (A type or B type). Please use a conversion adapter if necessary.

[Important notes regarding transformers and adapters] A transformer adjusts the voltage to suit the requirements of the equipment. Conversion adapters only change the shape of the plug and do not adjust the voltage. Using only the conversion adapter without a transformer may damage the product.

[About responsibility] We are not responsible for any failure or damage caused by improper usage, such as operating the product without a transformer.

3. Language and manual Product instructions and displays may only be in Japanese. The English version of the manual can be downloaded from our website.