18650 Power Bank Case Support PD 22.5W Quick Qi Wireless Charger for IPhone Xiaomi Powerbank Shell 18650 Battery Holder Box

Solder-free 14-cell 18650 battery power bank kit PLEASE NOTE: This product does not contain batteries!

Feature

Size:169*80*44mm

Normal Version: Maximum Power: 5V-2.1A;

Wireless Charge Version: Maximum Power: 5V-2.1A, Wireless Charging :5W;

Quick Charge Version: Maximum Power: 5V-3A 9V-2A 12V-1.5A;

Quick+Wireless Version: Maximum Power: 5V-3A 9V-2A 12V-1.5A 3.4V-5.5V-5A, Wireless Charging :10w;

Precautions

1. The battery cannot be used if its outer skin is damaged. 2. Pointed batteries cannot be used, only flat batteries can be used. 3. the voltage is in line with 3.2V-4.2V 4. The positive and negative poles need to be placed and used correctly. 5. Do not use or store in a high temperature environment.

Package included

1x 18650 Power Bank Case(Batteries not included)

Note: 1.We don't offer retail package,but we will pack it well before shipped out. 2.Please allow 0-1cm error due to manual measurement. plz make sure you do not mind before you buy. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Q&A

Q1: The screen displays ''0'' A1: After the battery is installed, the battery box needs to be plugged in and activated, so that the screen can be displayed normally

Q2: The battery cannot be fully charged: A2: Try to change the charging head or change the cable The higher the power of the charging head, the better. For example, use a fast charging head that supports PD protocol or QC protocol.

Q3: No wireless charging (wireless charging version) A3: Take off the phone case, it will be more sensitive. You need to put it in the exact spot and lay it flat. If it is not placed properly, it will not be able to charge.

Q4: When charging the phone from the front, it shows 52%. When you pull it out and put it back, it shows 98%. What is the principle? A4: This is virtual power, you need to discharge the power and then fully charge it again. The power output is inaccurate at the beginning and needs to be cycled 2-3 times The cycle is to discharge to 0 and recharge to 100. after several cycles

Package information: 1 x Power bank case (battery not included)