10-Port Gigabit Desktop Switch with 8 PoE+ PortsWhat does this product do?The TL-SG1008MP is a 8-Port Gigabit Rackmount/Desktop Switch with all 8 RJ45 ports supporting the PoE+ standard.. Provides a simple way to expand a wired network by transferring power and data over a single Ethernet cable. With a total power capacity of 153W, up to 30W per port, TL-SG1008MP can power more high-power devices such as wireless access points (AP), IP cameras or IP phones. Additionally, with innovative energy efficiency technology, the TL-SG1008MP saves on energy consumption, making it an eco-friendly solution for your TL-SG1008MP business network.How does this product work?All 8 ports of TL-SG1008MP support Power over Ethernet Plus standard (PoE+) which can automatically detect and supply power to any IEEE 802.3af/at compliant device. In this situation, electrical power is transmitted along with data in a single cable, allowing you to expand your network where you do not have electrical cables or outlets, where you want to connect devices such as APs, IP cameras or IP phones. Overload fix. TL-SG1008MP has a priority function that helps protect the system when its power is overloaded. If the power consumption of all PoE+ devices is greater than or equal to 153W, a priority will be arranged among the 8 PoE+ ports, at which point the system will cut off the power to the lowest priority port . Port priority function.Priority (port 1 > port 2 > port 3 > port 4 > port 5 > port 6 > port 7 > port 8): This feature helps protect the system if the power is overloaded. For example, if ports 1, 2, 4, and 7 use 30 W (maximum power per port is 30W, system power is 153W total), and there is an additional device inserted into Port 3 at 25W, the system will cut off power to port 7 in response to the power exceeding the 153W limit. This means that ports 1, 2 and 4 will use 30W, and port 3 will use 25W, with no power supplied to port 7, as it has the lowest designated priority among the ports in use . Easy to Use.TL-SG1008MP is easy to install and use. No configuration or installation required. With its desktop/Rack-mount design, outstanding performance and quality, the TL-SG1008MP 8-Port Gigabit Switch with PoE from TP-Link is an excellent choice for expanding your home or office network.Features:-8 10/100/1000Mbps RJ45 Ports-Equipped with 8 PoE+ ports that allow data and power transfer in a single cable.-Compatible with equipment under the IEEE 802.3af/at standard, thus expanding home and office networks.-Technology Innovative energy saving reduces energy consumption.-Supports PoE+ standard with a total power of 153W* and up to 30W per port.-Plug and play design, no configuration required. specs:Hardware Features:-Interface: 8 Ports 10/100/1000Mbps RJ45 AUTO Negotiation/AUTO MDI/MDIX -Network Media: 10BASE-T: UTP cable category 3, 4, 5 (maximum 100m) - EIA/TIA-568 100? STP (maximum 100m) - 100BASE-TX: Category 5, 5e UTP cable (maximum 100m) - EIA/TIA-568 100? STP (maximum 100m) - 1000BASE-T: UTP cable category 5, 5e, 6 or above cable (maximum 100m) - EIA/TIA-568 100? STP (maximum 100m) -Number of Fans: 1-Physical Security Lock: Non-Power Supply: 100-240VAC, 50/60Hz-PoE Ports (RJ45): Standard: Compliant with 802.3af/802.3at PoE Ports: 8 Power Supply: 153W-Dimensions: 294 x 180 x 44 mm -Assembly: Rack Mounting - Maximum Power Consumption: 8.57W(220V/50Hz. no PD devices connected) - 173.65W(110V/60Hz. with PD devices connected 153W)-Max Heat Dissipation: 29.22BTU/hr(no PD devices connected) - 592.15BTU/h(with PD devices connected 153W)Performance:-Bandwidth / Backplane: 16 Gbps - MAC Address Table: 4K-Jumbo Frame: 16 KB-Packet Forwarding Rate: 11.904 Mpps-Buffer Size: 1.5MbitsSoftware Features:-Advanced Features: Compatible with PD equipment - IEEE 802.3af/at - Priority function - Auto learning Mac Address and Time Counting - IEEE802.3x Flow Control For Full-Duplex Mode And Backpressure For Half-Duplex Mode - Transmission Method: Storage and ShippingOthers:-Certifications: CE, FCC, RoHS - Package Contents: TL-SG1008MP - Power Cable - Installation Guide - Rack Mounting Kit - Rubber FeetEnvironmental Factors: -Operating temperature: 0?~40? (32?~104?)-Storage temperature: -40?~70? (-40?~158?)-Operating Humidity: 10%~90% non-condensing.-Storage Humidity: 5%~90% non-condensing. Claims will only be attended to up to 5 days after receiving your order.
