A Center Finder Tool with a Centering Head for Measuring Pipeline Diameter

Features: 1: It can be wrapped around the pipe for measurement and marking. Easy to use, it is a must-have for sleeve fitters and welders. 2: Used to set the centerline, establish angles/markings for butt joints, and locate points within pipelines/tanks. 3: You can push the center pillar down to the anchor point as needed. Can measure tanks or pipelines with a diameter of at least 1/2 inch or larger. 4: This safety tube center detector has a 4-inch Y-shaped base and an adjustable dial bubble protractor (DSL): To determine the liquid level, the green liquid bubble needs to be located between the two lines on the protractor. Note: When determining the angle, regardless of the angle, the green bubble should be in the horizontal position. Specifications: Material:+Hard alloy steel Packaging size: 160 * 110 * 40mm/6.30 * 4.33 * 1.57 inches Packaging weight: 320 grams/11.29 ounces Easy to operate: Step 1 Use the included hex wrench to loosen or tighten the hex nut. Step 2 Place the pipeline marking tool on the pipeline and find the desired angle. Step 3. Push the center pillar down to the fixed point position. Step 4. Strike with a hammer to leave a fixed point mark on the pipeline. Material: Metal The set includes: 1 * Angle locator Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.