Professional Diving Torch High Power Dive Flashlight 600M Strong Light Diving Lamp Amphibious Hand Light Fishing Lantern

🔥🔥🔥Super bright T40 diving flashlight! ! Diving 600M! ! Magnetic switch! ! 🔥🔥🔥

If you need a bright, high-quality dive flashlight, you can’t go wrong with this T40 flashlight!

✨Product features: 📍Using T40 beam, multi-chip matrix LED superimposed brightness is improved, and the wide-angle lighting beam is 120°, which can clearly illuminate underwater scenes in a wide range.

📍Supports diving to 600 meters underwater. The water pressure resistance can be up to 10 times that of ordinary diving flashlights. It will not be deformed or damaged due to excessive water pressure in deep water areas.

📍IPX8 waterproof, waterproof design from inside to outside, double-layer thickened waterproof ring, tightly meshed structure, professional choice for diving lighting.

📍Using a magnetic switch, the underwater operation is more sensitive and avoids shifting due to the impact of water flow.

📍Equipped with a hand rope, you don’t have to worry about the flashlight suddenly falling when diving.

✨Product parameters: ●Wick: T40 wick (latest upgrade)

●Battery: 2*18650 batteries (not included in the kit)

●Underwater diving: 600M

●Terrestrial lighting: 300-500M

●Lighting mode: 3 types strong - weak - fast flash

●Waterproof level: IPX-8 (professional diving)

●Material: aviation aluminum alloy

●Surface treatment: hard anodizing

●Size: 20.5*2.8*5 cm / 8.07*1.10*1.97 inches

🚨🚨Note: 1. We provide different kits for different customer needs. It is recommended to choose the kit containing 18650 batteries.

2. Before using the battery, the external insulation paper should be removed to make the flashlight work normally.

3. When installing the battery, please pay attention to the correct direction, install the battery in the correct direction and identify the positive and negative poles, otherwise it may cause a short circuit in the flashlight.

4. When using a flashlight, you should check whether the thread is tight and not loose, otherwise it may not be able to illuminate or the brightness may be low.

5. When using a flashlight for diving, you should check whether the threads are tight and not loose. Failure to tighten them will cause water to enter the flashlight.

6. The appearance of water mist or water droplets on the mirror is a temporary condition caused by temperature differences. It will recover after using a hair dryer or leaving it in the sun for a while.

Kit description: Kit A-Flashlight*1 (batteries not included) Kit B-flashlight*1, 18650 battery*2, universal charger*1

The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU Product Safety and Compliance laws.