1PC 433MHZ Universal 4 Channel Wireless RF Remote Control Duplicator Copy Electric Gate Garage Door Key Switch Fob Controller Duplicator Door Opener

Description: Support the copy of the rolling code and fixed code, support for more brands can be applied to copy more kinds of remote control.

Compatible: 2260 (all manufacturers) 2262 (all manufacturers) Pt2264, 5326 (all manufacturers) Sc5262, ht600, ht680, ht6207, ht6010, ht6012 Ht6014, smc918 series, 527 (all manufacturers) 1527 (all manufacturers) 2240 (all manufacturers) Some 433mhz compatible brands (bearing code): For bft mitto2 mitto4 (old version) For Bebinca in WV For doorman tx4 For good floors For v2 For novoferm For facial xt4 433rc For TXB-42R key For data ptx4 For god au1600 For nice-smilo For Rossi For motorline mx4sp dsm For dea mio tr2 For Piccinini tx3c For centurion nova For an EM-4 engine For fading jubi For Hiland

Specification: Model Number: 433MHz Wireless Communication: RF Chipset compatibility: all fixed code and learning code Feature 1: Remote Control Duplicator Feature 2: Electric Gate Garage Door Key Feature 3: Universal Gate Remote Control Feature 4: Cloning Duplicator Key Features 5: Wireless Rolling Code

Reproduction Method: Here is the way to copy Memory clearance 1. Press buttons 1 and 2 simultaneously until the LED flashes 3 times 2. Release button 2 (Keep pressing button 1), and press button 2 slowly for 3 times, LED flashes quickly. 3. Release both buttons, the duplicator is ready for copying Duplicating: Put the duplicator aside from the original transmitter, as close as possible.

Fixed code remote control: Press and hold button 1 of the original transmitter, then press and hold button 1 of the duplicator until you see the duplicator’s LED flashes mean the duplicating succeeds. Repeat the above step for the rest buttons. The duplicator will work after duplicating.

Rolling code remote control: Press and hold button 1 of the original transmitter, then press and hold button 1 of the duplicator until you see the duplicator’s LED flashes mean the duplicating succeeds. Once 1 button is duplicated, the rest buttons will generate automatically, please follow the original receiver manual to insert the new duplicator on the receiver. If you erase the code by mistake, you can resume it by pressing and holding both of the \3\ and \4\ buttons on the remote controllers at the same time, after 10 seconds, the LED flashes 2 times and turns off which indicates the code of the copy the remote controller is resumed.

Remarks: For fixed code &learning code remote controls, the duplicator will work after duplicating. But for the rolling code brand listed above, please follow the original manual to program the duplicator to the receiver after duplicating.

Package includes: 1* 433MHZ Remote control