CO2 Head Gasket Leak Tester + 10ml Reaction Fluid + 25-55mm Adapter

Set contains:- special tube made of PVC - 10 ml reaction fluid (enough for approx. 25 tests)- universal adapter: 25mm - 55mm - user manualApplication:If you suspect damage to the cylinder head gasket or the cylinder head itself, you can perform a verification test yourself.. The tester is suitable for combustion engines (petrol, diesel, LPG) liquid cooled. In the event of a damaged head gasket or cylinder head, some of the exhaust gases containing, among others,. CO2 goes to the cooling system. The operating principle of the device is based on measuring the CO2 concentration - in the case of increased concentration, the reaction fluid reacts with CO2 and changes color. How to use:

Fill the tester tube with reaction fluid (about 2ml) to the level below the chambers. Connect the tester to the expansion tank or radiator opening. Start the engine (preferably warm), introduce higher revs to obtain higher combustion pressure. Leave the engine idling at a slightly increased speed and observe the reaction fluid behavior. (the liquid in the tester should bubble). Changes the color of the reaction fluid to yellow or green (very minor damage) within a few minutes of testing, it indicates a damaged head gasket or damage to the head itself. Wash the tester tube with water and dry thoroughly.

Attention! During the test, do not allow the coolant to mix with the reaction fluid!If the liquids mix the test result may be incorrect!

size: 1