Features:
1. [Fast Scanning] The detector uses a microelectronic processor to control the chip unit calibration and instrument self-test system, which can scan and test easily and quickly, improve the work efficiency of treasure hunters and reduce labor time.
2. [Accurate Positioning] The detector can identify specific types of metals through frequency modifiers, accurately locate the location and position of objects buried, and has a long-range search system and precise position detection system.
3. [Wide Application] In addition to military applications, the detector is also widely used in security inspections, archaeological treasure exploration and exploration.
4. [Detectable Types] The detector can detect gold, silver, copper, conventional precious metals and gemstones such as diamonds, emeralds, rubies, etc.
Specifications:
Item Type: Metal Detector
Material: ABS, Sponge Coating
Battery: Built-in Rechargeable Battery (Ni Cr) 2000mAh (Built-in)
Use: In addition to military applications, it is also widely used in security inspections, archaeological treasure exploration and exploration.
Detection objects: gold, silver, copper, conventional precious metals (palladium), gemstones (diamonds, emeralds, rubies, etc.)
Search range: approx. maximum 1400m/4593.2ft
Detection depth: approx. maximum 20m / 65.6ft
Transmission frequency: 5.6-6KHz
Signal frequency: 360-440MHz
Packing list:
1 x signal stick
1 x power adapter
1 x instruction manual
1 x storage box
How to use: 1. Hold the instrument and scan very slowly in an arc while turning your body. At this time, the prospector's elbows should always be firmly attached to both sides of the body, and turn about 40 to 60 degrees. Note: The prospector must turn slowly and keep the body stable.
2. Standardize your scanning action. First, let the receiving antenna extend correctly. Let the receiving antenna face the front of you, open at 90 degrees to the body, and do not deflect to the left or right.
3. When the antenna is aimed at the target, the instrument will be determined even if you continue to survey past the target. When you feel that this determination is effective, please keep this direction in mind. Then, move the instrument about 10 meters to the left or right, repeat the process of determining the target, observe the direction of this measurement, and the intersection of the two directions is the target buried direction.
4. If you feel that there is still a certain deviation in the specific direction just measured, you can change the angle to measure. If the target is within about 10 meters, you should walk slowly and steadily along one of the prescribed routes. When passing the target and being directly above it, the antenna of the instrument will shake on both sides, and the measured position is very accurate at this time. (Please refer to the manual for specific operating instructions) The product comes with a demagnetization function (as long as the receiver probe is close to iron metal, it can be demagnetized after 3 alarms)
