XY-CD60 Digital Charging Timer Controller DC 6 -60V Lithium Lead Acid Battery Charging / Discharging Protector Controller Module
Description:
This Product is a battery charge and discharge controller module. It can be used for DC 6 -60V lithium/lead-acid battery.
Feature:
Multi-function test instrument
Dual mode work
Support charging protection
Support discharge protection
Support set the charging/discharging time
Automatic detection parameters
HD LCD display
Multi-parameter display
Support power saving mode
Supports automatic battery detection
Comfortable outer casing
Parameter:
Product name: Lithium Battery Charging/Discharging Controller
Model: XY-CD60
Working voltage: DC 6 -60V
Prevent Over-charge
Prevent Over-discharge
Display battery voltage, percentage and operating time.
Charging Time Control: 00:00 -99:59 hours
Discharging Time Control: 00:00 -99:59 hours
Delay: 0 -999 seconds
Work Temperature: -40 -85℃
Work Humidity: 0% -95%RH
Size: 79*43*27mm
Function:
Module supports 2 working modes: Charging Control P-1 and Discharging Control P-2.
Charging Control P-1:
This mode is used for charging control to prevent overcharging. Display symbol IN indicates charging mode.
Discharging Control P-2:
This mode is used for battery discharge control to prevent battery over-discharge and delay battery life. Display symbol OUT indicates discharging mode.
Battery voltage percentage:
It is value get from battery voltage V, Lower Limit Voltage Value DOWN and Upper Limit Voltage Value UP.
Calculation formula: V/(UP-DOWN).
Automatic parameter check: Screen will display and flashing ERR if the Lower Limit Voltage Value DOWN is more than the Upper Limit Voltage Value UP.
[Charging Control P-1 Mode]
Input terminal connect DC 6V-60V charger which use for battery.
Output terminal connect 1pc of DC 6 -60V battery. It will display 0.00V and nbE if the battery does not meet the requirements.
Output turn ON and the input charger starts charging the battery if battery voltage is less than the Lower Limit Voltage Value DOWN.
Output turn OFF and the input charger stops charging the battery if battery voltage is more than the Upper Limit Voltage Value UP.
The symbol IN will flashing when charging.
Support set parameter:
Upper Limit Voltage Value UP: Maximum voltage of the battery. Stop charging the battery if it exceeds this value. It is also the overcharge protection voltage value.
Lower Limit Voltage Value DOWN: Battery allowed minimum voltage. Start charging the battery when the battery voltage is lower than this value.
