LED Motion Sensor Indoor Stair Light Controller Kit DC 12V 24V For Stairs Flexible Strip 32 Channels Automatic

Features:

Made of high quality plastic and aluminium, with a stable output and sensitive sensing. Perfect for homes, shopping malls, shops etc.

Fully automatic, turns on the light when it senses someone walking and turns off the light when they leave.

With anti-leakage system, stable output, safer and more secure use.

It can control the lighting mode, time and brightness.

Installation Tips:

When the lamp is plugged into the controller, be sure to find the socket of the corresponding serial number.

The controller and sensor can be in the electric box.

Be sure to connect the positive and negative poles, the white is the positive, the black is the negative, and the low-voltage current is DC 12-24V, not AC 220V/110V.

It is recommended to bury the line in advance and install the lights when the stairs are decorated.

The wiring needs to be connected in case of power off, to avoid short circuit.

Setting:

Press and hold the [1] key for 4 seconds to enter the step number setting of the step light, and then press the [1] key for a short time to light up the "1-32" channel number light, Select the number of step light channels according to the channel light indication, and then press and hold the [1] key or wait for 5 seconds to save the setting;

Briefly press the [1] key to select five patterns, and select the desired pattern according to the display indicator;

Briefly press the [2] key to select the time "10s-20s-40s-80s-100s" for holding the constant light;

Press and hold the [2] key for 4 seconds to select the brightness of the stair lamp, and then press and hold the [2] key to select "10%-20%-40%-60%-100%", and then press and hold the [2] key or wait for 5 seconds to save the setting;

Briefly press the [3] key to set the water flow speed of the stair lamp, and the time is "0.3s-0.5s-0.8s-1.0s-1.2s";

After 5 seconds of no operation of all keys, all lights flash once to automatically save all set parameters

Specifications:

Product: 32-channel stair sensor

Voltage: DC 12V/DC 24V

Power: ≤500W MAX

Sensors: 2 (A, B)

Channel: 32 (set to 1-32 step)

Operating Mode: Photoelectric

Induction distance: 3M

Protection Level: IP20

Package Included:

1 x LED Controller

2 x Sensors

2 x Output Cables

The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU Product Safety and Compliance laws.