Rubber Band Saw Scroll Wheel 10 Inch 12 Inch 8 Inch

Features: *8 Inch: Use for Band Saw Wheel diameter 205 mm, advice bandsaw blade length is 1425 mm. *9 Inch: Use for Band Saw Wheel diameter 230 mm, advice band saw blade length is 1570 mm. *10 Inch: Use for Band Saw Wheel diameter 250 mm, advice band saw blade length is 1826 mm. *12 Inch: Use for Band Saw Wheel diameter /317 mm, advice band saw blade length is 2240 mm. *14 Inch: Use for Band Saw Wheel diameter 350 mm, advice band saw blade length is 2560 mm. *The rubber band needs to be stretched. After receiving the goods, put them in hot water and heat them to spread evenly. *Then hang it hard on the wheel without adding glue! *In order to for ensure that the anti-skid rubber ring can be tightly combined with the outer edge of the wheel, and avoid slippage during sawing and insufficient cutting force due to the loose rubber ring, the circumference of all anti-skid rubber rings must be smaller than the circumference of the band saw wheel.

Installation method: 1. Remove the damaged rubber ring. If there is rubber ring on the outer edge of the wheel, please clean up the first. 2. Soak the new anti-skid rubber ring in warm water for 3-5 minutes, and install it after the rubber ring is softened. 3. When installing, start from side of the wheel, press end of the rubber ring firmly into the groove on the outer edge of the wheel, and then use a flat-blade screwdriver to slowly pry the rubber ring into the groove on the outer edge of the wheel. Do not use too much force. It is so violent that the rubber ring is damaged. 4. If necessary, you can place a few drops of glue along the grooves on the edge of the wheel to for ensure a more secure installation.

Specifications: Product Name: Band Saw Rubber Band Material: Rubber Color: Black Optional Size: 8 Inch, 9 Inch, 10 Inch, 12 Inch, 14 Inch 8 Inch: 8" x 1/2" x 0.12" (205 * 12.7 * 3mm)(Approx. ) 9 Inch: 9" x 1/2" x 0.12" (230 * 12.7 * 3mm)(Approx. ) 10 Inch: 10" x 1/2" x 0.12" (250 * 12.7 * 3mm)(Approx. ) 12 Inch: 12" x 3/4" x 0.12" (317 * 20 * 3mm)(Approx. ) 14 Inch: 14" x 1" x 0.12" (350 * 24.5 * 3mm)(Approx. ) Suitable for: WoodWorking Band Saw Quantity: 1Pc

Package Included: 1 × Band Saw Rubber Band

Note: 1.Transition: 1cm =10mm =0.39inch. 2. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 3. Please allow slight manual measurement deviation for the data.