Ionac Replacement Water Shower Chlorine Beautiful Easy To Made In Japan [Official Store] 3-piece Set, Filter, Softening, Head, Detoxification, Skin,

[Replacement guideline] Replace the product approximately 4 months after first use, or within 4 months when the amount of water used reaches approximately 30,000L. Regardless of how much you use it, replace it after about 4 months of use. (Once water is passed through, the filter material inside the filter begins to oxidize.) *In areas where tap water is hard, it may lose its effectiveness after about 3 months. If you feel that the effect is becoming less effective, replace it. IONAC generates a weak current of approximately 900mV within its body. This electrochemical action (oxidation-reduction reaction) makes water gentle on both bare skin and hair. ■Water Softening It softens highly hard water and solves the problems of people living in hard water areas. Rather than removing hardness components (mainly magnesium and calcium), water with the same properties as soft water is created by changing the crystal structure of hardness components. *There is no change in hardness when entering and exiting water. ■Chlorination treatment Detoxifies harmful chlorine and is gentle on bare skin and hair. It protects your skin and hair by converting chlorine, which has oxidizing and bleaching power, into chlorine ions that are harmless to the body. [Request for use] Please refrain from using in homes where water pressure is extremely low. If you live in a home with extremely low water pressure or have an old water heater, you may not be able to use the product in rare cases. When installing the ionac, insert the threaded part straight. (If you insert it at an angle, the threaded part may be crushed and you may not be able to install it.) If you do not use the Ionac for more than a week, please do the following to prevent the Ionac from deteriorating. ①Remove the ionac ②Fill water in a basin or similar container and store the ionac submerged. (If the filter is not used for a long time, the filter material inside the filter may dry out and oxidize, leading to further deterioration.) [For your safety, please be sure to follow these guidelines] Ionac is designed with the balance between the filter section and head section in mind. If you attach a head made by another company to an IONAC filter, it will put a load on it that exceeds its designed strength, which can cause the filter connection to break or fall from the shower hook, which is very dangerous. Be sure to attach the IONAC head to the IONAC filter. *We cannot be held responsible for any damage caused to users by replacing the product with another company's product. [Recommendation for replacement] Replace the product approximately 4 months after the first use, or when the amount of water used reaches approximately 30,000L even within approximately 4 months. Approximately 4 months after starting use, regardless of the amount used.