1Set DC18V-50V 35x76x233mm Waterproof GMI 300/350 Solar Micro Grid Tie Inverter

300W Solar Micro Inverter MPPT Grid Tie Inverter Pure Sine Wave Inverter DC 18V-50V to AC 120V/230V

Specification: Model: GMI 300/GMI 260/GMI 350 Input Data(DC,PV) Number of Input MC4 Connector: 1 set MPPT Voltage Range: 24V-40V Operation Voltage Range: 18V-50V Maximum Input Voltage: 50V Startup Voltage: 18V Maximum Input Power: 300W/260W/350W Maximum Input Current: 12A

Output Data(AC) Single-Phase Grid Type: 120V / 230V Rated Output Power: 280W Maximum Output Power: 300W/260W/350W Rated Output Current: 120V: 2.33A/230V: 1.21A Rated Output Voltage: 120V AC / 230V AC Default Output Voltage Range: @120 V AC: 80V-160V / @230V AC: 180V-280V Rated Output Frequency: 50Hz / 60Hz Default Output Frequency Range: @50Hz: 47.5Hz-52.5Hz / @60Hz: 57.5Hz-62.5Hz Power Factor: >0.99 Total Harmonic Distortion: THD <5%

Efficiency Peak Efficiency: 92.5% CEC Weighted Efficiency: @120V AC: 90.5% / @230V AC: 91.5% Nominal MPPT Efficiency: 99.9% Night Power Consumption: <700mW

Mechanical Data Operating Ambient Temperature Range: -40℃ to +65℃ Storage Temperature Range: -40℃ to +85℃ Dimensions (W x H x D): 35x 76 x 233mm Weight: 0.5kg Waterproof Grade: IP55 Cooling Mode: natural convection-no fans

Other Features Transformer Design: high frequency transformers, galvanically isolated Integrated Ground: equipment ground is provided by the PE in the AC cable. No additional ground is required Protection Functions: isolated island, voltage, frequency, temperature, current etc.

Installation Procedures: Step 1- Attaching the micro inverters to the racking. a.Mark the location of the micro inverter on the rack, with respect to the PV module junction box or any other obstructions. b. Mount one micro inverter at each of these locations using hardware recommended by your module racking vendor. Step 2- Connect the micro inverter AC cable and connect to AC bus cable (L-brown,N-blue,G- green&yellow) one by one, please do not exceed the maximum current of AC bus cable. Step 3- Connect micro inverter to the PV module, please do not exceed PV panel(s) VOC over inverter max. input voltage. Step 4- Install the AC branch circuit junction box, wire the conductors of the AC bus cable. Connect the AC branch circuit junction box to the point of utility-grid Interconnection. Step 5- Double check all micro inverter, connectors and cables are correctly and well connected. Step 6- Turn on the AC circuit breaker on each AC branch circuit of micro inverter. Step 7- Turn on the main AC circuit breaker of utility-grid. Your system will start producing power after a 30 sec safety delay period.

LED Display: 1. Green light steady: micro inverter in generating. 2. Red flash: micro inverter in waiting. 3. Red light steady: a. Island protection; b. Over-temperature protection; c. Over/low AC voltage protection; d. Over/low DC voltage protection; e. Over/low AC frequency protection; f. Fault.

Package List: -1 x GMI 300 Micro Inverter -1 x User Manual -1 x AC Cable

Note: The product has 120V and 230V voltage optional.