KOVIX Alarm U-Lock KTL14-150

[Product Description] ■This is an extremely powerful U-lock with a strong steel body and a sturdy key barrel. ■It can be securely attached to tires and wheels. It can be used on motorcycles as well as bicycles. ■When it detects vibration, it sounds a loud 120dB piercing alarm, making it an effective anti-theft device for your beloved vehicle. ■It is waterproof and has a special surface treatment that gives it a luxurious finish. ■The alarm uses a CR2 lithium battery. ■The alarm has an ON/OFF function, so you can turn it off while traveling and prevent false alarms caused by vibrations, making it suitable for use on the go. [Size] ■ Lock bar diameter (U-shaped part): 14 mm (17 mm) ■ Lock bar internal width (U-shaped part): 83 mm ■ Lock bar internal height (U-shaped part): 150 mm Alarm unit built-in part ■ Diameter: 34 mm ■ Width: 152.5 mm (160 mm) *The size indicated in ( ) is the size including the cover. ■ Weight: 1.1 kg [Product set contents] ■U-lock body x 1 ■Dedicated keys x 3 ■CR2 lithium battery x 1 ■Back of package/instruction manual (English) x 1 [Material] Steel Product name KOVIX Alarm U-Lock KTL14-150 Product Description ■This is a very powerful U-lock with a strong steel body and a sturdy key barrel. ■It can be firmly fixed to tires and wheels. It can be used not only for motorcycles but also for bicycles. ■When it detects vibration, it sounds a loud 120dB piercing alarm, making it an effective product for preventing theft of your beloved car. ■In addition to being waterproof, it has a special surface treatment that gives it a luxurious finish. ■The alarm uses a CR2 lithium battery. ■The alarm has an ON/OFF function, so you can use it while on the go to prevent the alarm from being accidentally activated by vibration when you want to turn it off, such as while traveling. Handling Instructions [How to switch ON/OFF] When you turn the key approximately 270 degrees and then turn it back, a short beep will sound. Approximately five seconds later, another beep will sound to indicate that the security alarm is in ON mode. ■If you repeat the above steps, you will hear two short beeps. The security alarm will then be turned off. *When locking the key, please check the operating sound before locking. [How to install the battery] 1. Remove the lock bar. 2. Insert a Phillips screwdriver into the hole in the lock bar that does not have the key cylinder and remove the screw. 3. Remove the silicone cover, cover, and alarm unit in that order. 4. Push the tabs on the alarm unit inward to open the cover. 5. Install the battery. 6. Reassemble in reverse order to complete. *When installing the alarm unit, be sure to insert it carefully into the notch on the alarm unit. Product size ■ Lock bar diameter (U-shaped part): 14mm (17mm) ■ Lock bar internal width (U-shaped section): 83mm ■ Lock bar internal height (U-shaped section): 150mm Built-in alarm unit ■Diameter: 34mm ■Width: 152.5mm (160mm) *The size indicated in parentheses includes the cover. ■Weight: 1.1kg Product set contents ■U-lock body x 1 ■ Dedicated key x 3 1 x CR2 lithium battery ■Back of package/Instruction manual (English) x1 Useful items ■We also sell convenient U-lock holders that can be used together. Precautions ■There is no warranty. ■Please check the tire size etc. of the motorcycle you will be using. ■A Phillips screwdriver is required separately to install the battery.