Universal 3D Glossy Black Car Side Wing Air Flow Fender Grill Intake Vent Trim S

Product parameters

Product name:Side Fender Applicable modelsUniversal Product material: High quality ABS plastic

Color：Glossy Black Production process: blowing mould+paint Installation: stick or paste -Plastic material is Light-weight and easy to carry and replace -Simple and easy to install -Stylish appearance makes your car more beautiful and fashion

Precautions:

(1) In the cold zone (or when the external temperature is lower than 18 °C), the adhesiveness of the double-sided tape is lowered. Use a heating device such as a hair dryer to heat the vehicle's adhesive surface and the inner rubber.

(2) When sticking double-sided tape, please press it fully and hardly. because the adhesive ability is reduced after the entire adhesive is pasted and peeled off, please confirm the position properly and then paste it during installation.

(3) The adhesiveness of the double-sided adhesive is improved after sticking. Please try to avoid washing your car within 24 hours after installation. If it is necessary to wash and wax on the day of installation, it should be kept for at least 1 hour, so as not to immerse the water in the pasting part. In the case of work. (Please avoid automatic car wash and high pressure car wash on the day of installation).

(4)Please keep the surface clean and dry, no sand/dust or put some adhesion promoter (Without)at it before installation.

(5)Don't drive on the highway in 3 days after installation