Lens Plate for Canon RF IS USM Retrofit Tripod Japanese F-Foto 200-800mm F6.3-9 (Arca-Swiss Compatible, Mount, Two-point Mounting, Manufacturer)

[Product Overview] This is an Arca-Swiss compatible lens plate with two screws for the Canon RF 200-800mm f/6.3-9 IS USM telephoto zoom lens. [Product Features] While this lens requires a screw-mounting system, this plate allows for one-touch mounting and removal. It is specifically designed to fit the base dimensions of the original tripod mount. Regarding compatibility: The Arca-Swiss compatible shape is not a strict standard, so some products (especially lever-type heads) may not be compatible. If you discover after purchase that a product not listed here is incompatible, please contact us. [Confirmed compatibility] Heads: RRS BH-30, BH-25LR, B2-L, GITZO GH1382QD, Peak Design Travel Tripod, SIRUI A-10R, Leofoto G4, LH-30, ARCA-SWISS P0 hybrid, Vanguard BH-50, Neewer ball head, TYCKA ball head, Neewer QR clamp, SUNWAYFOTO DLC-60LX, MENGS CL-50S, DC-38Q. [Incompatible heads] FALCAM TreeRoot. For other heads, please contact us. We are currently collecting information. [About F-Foto] [Established in 2012] We are a Japanese camera accessory manufacturer (headquartered in Gunma Prefecture). [Online Only] As an online-only manufacturer without a physical store, we are able to deliver high-quality products at reasonable prices. [Many Highly Rated Products] We offer a wide variety of highly rated (over 300 reviews) original products, including shoe covers, tripod mounts, lens plates, and compatible hoods. [High Quality (Inspected at Domestic Factories)] All products manufactured overseas are inspected at our domestic factories and delivered to Amazon warehouses before being delivered to customers. [Reliable Guarantee] In the unlikely event of an initial defect, we will provide replacement support, so you can purchase with confidence. [Materials] The plate is made of aluminum, machined and then hard anodized to a black finish. Because it's machined from a block of aluminum, it's extremely rigid and sturdy. It can also be used with other lenses as long as the tripod mounts match the plate dimensions. Two mounting screws are pre-installed, but can be removed or replaced. [Installation Instructions] The original tripod mount has two screw holes. The lens plate has two fixing screws (1/4" and 3/8" screws). Align the fixing screws with the screw holes and use a coin or similar tool to tighten the screws. [Other Features] Two stopper screws and a tool are included to prevent the lens from falling off when attached to the tripod head. [Product Overview] This lens plate is compatible with the Canon RF Mount Telephoto Zoom Lens RF 200-800mm F6.3-9 IS USM, and is a two-point mount that attaches to the bottom of an Arca-Swiss compatible tripod mount. [Product Features] The lens is usually attached to a tripod head using a screw, but by using this product, it can be attached and removed from the tripod head with just one touch. This is a special product that is designed to fit the bottom dimensions of the original tripod mount. [Installation Instructions] The original tripod mount has 1/4" and 3/8" screw holes. The lens plate has two fixing screws (1/4" and 3/8" screws). Align the fixing screws with the screw holes and use a coin or similar tool to tighten the screws. [Materials] The material is aluminum, which is machined and then hard anodized to a black finish. Since it is machined from an aluminum block, it is very rigid and sturdy. [Other features] Two stopper screws and tools are included to prevent the camera from falling off when attached to the tripod head. Regarding compatibility: The Arca-Swiss compatible shape is not a strict standard, so some products (especially lever-type heads) may not be compatible. If you discover after purchase that a product not listed here is incompatible, please contact us. [Confirmed compatibility] Heads: RRS BH-30, BH-25LR, B2-L, GITZO GH1382QD, Peak Design Travel Tripod, SIRUI A-10R, Leofoto G4, LH-30, ARCA-SWISS P0 hybrid, Vanguard BH-50, Neewer ball head, TYCKA ball head, Neewer QR clamp, SUNWAYFOTO DLC-60LX, MENGS CL-50S, DC-38Q. [Incompatible heads] FALCAM TreeRoot. We are currently collecting information on other heads, so please contact us.