UniFlex Iron-On Flex Special Effect Glitter Pink A4 Sheet

This heat transfer sheet (iron-on flex) will be perfect for personalizing your textiles. 1. put your textile support then the cut-out iron-on (shiny face on top)2. Protect the fusible web with baking paper3. Iron at 140°C for 10 seconds (do not use steam)4. Wait a few moments before peeling off the plastic film (and wait 24 hours before washing)This is a 60 micron heat-sealable polyurethane film (the adhesive support is 100 microns).You can use this heat transfer vinyl on cotton, polyester, or polycotton. Weeding is easy, but however, we do not recommend this model for small letters. This heat transfer vinyl is an elastic and resistant polyurethane that will not wrinkle after washing. (Wash resistance at 30°C). After washing, you will need to iron inside out. This iron-on is environmentally friendly since it is a water-based polyurethane without solvents or PVC.. The manufacturing is ecological, with a low carbon footprint, carried out entirely under the same roof (100% made in France from European raw materials). The Seller confirms that its products comply with all applicable laws and are only offered if they comply with Joom's policies and European laws on product safety and conformity.