HotaluX Single-Sided Power Supply, Installation Required, 40-Watt Straight Fluorescent Lamp (Hf32 Equivalent), Compliant with Japan Lighting

✅ [Warranty] 5-year manufacturer's warranty. [Specifications] Single-sided power supply, straight tube LED lamp, 40W. ◆Base: G13 T8 type ◆Voltage: AC 100V-242V 50/60Hz ◆Power consumption: 15.7W (equivalent to Hf32w). ◆Total luminous flux: 2600lm, Emitting color: Daylight white 5000k, Beam angle: 190° ◆Material: Polycarbonate + Aluminum ◆Dimensions: φ25.5mm x L1198mm ◆Weight: 229g ✅ [Safety Design] Compliant with the Japan Lighting Manufacturers Association's safety standard JLMA301. Designed to reduce the risk of electric shock, falling, and smoke, you can use it with confidence. ✅ [Effective for cost-effective LED conversion] The lamp uses the same G13 base as fluorescent lamps. This allows you to retrofit existing lighting fixtures to LED, making it ideal for cost-effective LED conversion. *Please note that a direct AC connection by an electrician is required before use. Color rendering index: Ra83. This lamp enhances the appearance of object colors. ✅ [High Energy Savings]: Replacing fluorescent lamps reduces power consumption by approximately 70%. Annual electricity bills can be reduced by approximately ¥2,850 per lamp. Affordable and low running costs allow you to quickly recover your initial investment. Thanks to its long lifespan, you can use it for extended periods without worrying about your electricity bill. It can be used in a wide range of applications, including schools, companies, factories, hospitals, and home offices, hallways, kitchens, and living rooms, with straight 40-type tubes. ✅ [Caution]: Inspect the fluorescent lighting fixture before use. If deterioration is found, replace the part or fixture. Installation should be carried out by a qualified contractor, electrical appliance store, or other qualified service provider. Use with a fixture equipped with a socket compatible with the input voltage. (Position distance: 3mm or more for input voltages of AC 150V or more, 2.5mm or more for input voltages under 150V). Do not use with sealed or nearly sealed fixtures. Do not use with insulated fixtures (SB, SGI, SG types). After installation is complete, affix the [Wiring Installation Completed Sticker] and [Power Supply Side Sticker] in an easily recognizable position on the fixture's reflector to prevent misuse.