1Pcs Usb To Can Adapter Ucan Board Based On Stm32F072 Support For Canable / Candlelight / Klipper Firmware

Description: UCAN Board Based on STM32F072 USB to CAN Adapter Support with CAnable / CandleLight / Klipper firmware Features: - Based on STM32F072 - Type-C USB socket - Supports CAN2.0A and B, baud rates up to 1M - Compatible for CANable - Support with CAnable / CandleLight / Klipper firmware - 3-pin screw terminal: CANH, CANL, GND - Jumper to enter bootloader for firmware updates - Onboard 120R termination default or Jumper to enable/disable termination About the Products: UCAN is a small low-cost open source USB to CAN adapter, compatible with CANable hardware. The UCAN enumerates as a virtual serial port on the computer and acts as a serial-line for the CAN bus interface. With the alternative Candlelight firmware, UCAN is enumerated as the local CAN interface on Linux. The UCAN adapter is compatible with ARM-based embedded platforms such as Raspberry Pi, Raspberry Pi Zero, ODROID, BeagleBone, etc. At the same time, it can also be used as USB to CAN application on Klipper. Specifications: Material: Plastic+Metal Packaging size: 12 * 8 * 1cm Packing: 1pcs Note: 1. The color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Please refer to the actual product received. 2. Please allow slight manual measurement deviation for the data. The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.