EDAL 433Mhz Wireless Auto Remote Control Cloning Gate for Garage Door Remote Control Portable Duplicator Key

One-to-one duplicate keys Each password lock itself storage Can copy repeated continuously using one million times Strong privacy Product Specifications: Working voltage:DC12V(27A battery included) Operating current:8mA Working frequency:433.92 MHz(315 MHz optional) Modulation mode:ask(am) Power transmission:100 mw Emission distance:50 to 100 m(evidence) Type encoding:copy themselves Working temperature:-10 to + 50c The following works by remote control ic modules(please check your original remote control before ordering),and you also have to keep remote code or learning code. 2262.2260,5026.5326,5326-3,5326-4,fp527,PT2240,ev1527,HT6010,HT6014,ht12e,HT640,ht680,PLC158,PLC008,SMC918,SMC926,PT2292,12L-4SC,HT6026,UM3750AM,etc. Use:garage door,motorcycle,car alarm products,home security products,short-range wireless remote control products,industrial control products Note: An essential condition for the selection of the remote control;copyed remote control to operate normally,the chips are compatible and frequency are correct. Before buying,make sure the copyed remote control operating frequency or choose & buy adjustable frequency remote control. Before buying,please confirm whether your remote control can be copyed or not. Remote control we can copy fixed code and learning code Instead of stealth code. it can copy original remote control car,remote control and two-way remote control rolling code(rolling code chip begin with HCS common,such as hcs200,hcs201,hcs300,hcs301,etc.) Note: It copies the remote control can not copy the computer code and rolling code,the device can only copy fixed code or learning code. How to Program:

Step 1 delete the existing code of our remote duplicator

1)Click and Hold A and B buttons together - Led will flash 3 times 2)Keep holding A button and release B button 3)Keep holding A button and push B button 3 times,Led will start flashing Non-stop

Now press any key on the remote control,LED lights are not bright,so delete code success;if you press the button LED lamp is lit,indicating that the original code is not deleted !

Step 2 - clone your original remote

1)Put both remotes Into back to Back position. Make sure they have direct contact 2)Click and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until led will make 2 blinks then 3 blinks then goes into Steady and you have successfully cloned.(the left keys follow the same above operation)