Motorcycle Tire Repair Tool Kit with Rubber Strips Tubeless Tyre Puncture Studding Plug Set for Car Truck Vacuum Tire Repair

Battery Included : no High-conrned chemical : None Type : Tire Repair Tools

: Mainland China

Instructions for use:

1. Mark the area where the tire needs to be repaired with a circle number and remove any punctures.

2. Use a tire repair probe to determine the direction of the hole and insert it clockwise to clean the dust inside the hole.

3. Cut one end of the adhesive strip into an oblique opening and pass it into the front hole of the pin insertion tool, so that the length of the adhesive strip at both ends of the hole is basically the same.

4. Insert the pin with the rubber strip into the tire along the hole, ensuring that the rubber strip is inserted 2/3 of the length, and rotate the pin 360 degrees before pulling it out.

5. Cut off the tire repair strip on the outside of the tire.

notes: 1. Due to many factors (such as the brightness of the display and the brightness of the light), the actual color of the item may be slightly different from the picture displayed on the website. 2. Note: Due to different measurement methods, the size may have a toleran of 1-2cm, which is not a quality problem.

Voltage: 7.4