■Product number: 1520 ■Supported size: Glue with a diameter of 7.0mm to 7.5mm
■Set contents: ・Glue gun body ・Glue gun stand ・2 glue sticks 19.5cm ・Japanese instruction manual ・Clear case ・Glue gun stand cosmetic case *Please refer to the image for size.
■Material: Main unit, stand: Plastic ■Voltage: AC100V ■Temperature: Approximately 180 degrees ■Frequency: 50/60Hz ■Product power: 20w
■Usage: Artificial flowers, decorations, metal, wooden products, paper, cloth, plastic, toy models, DIY (do-it-yourself), electronic wiring boards ■How to use: 1. Attach the wire stand to the glue gun body 2. , Insert a glue stick (adhesive) with a diameter of 7.0 mm to 7.5 mm from the back of the glue gun body. 3. Turn on the power and preheat for 3 to 5 minutes, then pull the trigger and the glue will come out. Masu *Please do not remove the glue stick once inserted into the main unit. If you cannot use it all, please keep it inserted. At that time, if the glue is too long to fit in the case, we recommend that you fold it and store it, as it would be a waste if you cut it. ★The next time you use it, it may take some time for the glue remaining inside the product to melt, and it may only come out little by little. Please turn on the power and heat it up gradually for 3 to 5 minutes before use. Continuous use time is approximately 10 to 30 minutes.
■Low-temperature type glue stick: Since this is a high-temperature type glue gun, if you use a low-temperature type glue stick, it may drip. If liquid drips, please turn off the power.
■Note: *There may be small scratches or dirt. *The case may also have dirt, burrs, or small scratches. ・The package may be dirty. This is a phenomenon that cannot be avoided during the manufacturing process. -About the glue gun- - Do not use glue sticks (adhesives) that do not match the size or type. The main unit may be damaged. ・During use, the area around the nozzle of the main unit and the melted adhesive become extremely hot. Please be careful not to touch it directly as it may cause burns. ・Do not point the nozzle upward during use. The melted liquid may flow back and damage the main unit. -When using a new glue stick for the first time, there may be a little smoke, which is normal. Rest assured, the smoke will stop coming out in about 30 minutes.
-About the stand- -Dust, rubber, etc. may adhere to the silicone part during manufacturing and packaging. It is difficult to package items in perfect condition, so please understand this before purchasing. ・The anti-slip gasket (suction cup) may not stick to the desk depending on the material. -Color and size may vary depending on production lot. - Images cannot represent 100% the same color. The actual image may differ. In addition, please read the enclosed instruction manual carefully before using it to ensure proper use. We cannot accept returns or exchanges for the above reasons. Please be aware of this before purchasing.
MYmama original
Glue gun & stand starter set
Comes with 2 super strong long type glue
MYmama original glue gun and glue gun stand are now included.
The drip-resistant design and thin nozzle improve the efficiency of detailed work.
Hand switch type that allows you to turn the power on/off at hand for easy operation.
It has also been PSE certified so you can use it with peace of mind.
The stand comes with a non-slip gasket.
Excellent stability with no shifting or wobbling.
A set of 2 super strong long size glue sticks that you can use as soon as you receive it!
It is resistant to yellowing and has excellent transparency so it does not interfere with your work.
High cost performance with complete set contents.
Recommended for beginners in handmade crafts.
