Crystal Process High Tech X1 Body Coat 200ml 2 Genuine Application -8500 (Includes Sponges)

Coating agent set [Product Description] If you want a finish that lasts for more than 5 years and has even more shine, we recommend the high-purity 8500! [How to use] 1. After thoroughly rinsing off any sand, dust, or oil, wipe off all moisture with a clean towel. 2. Protect areas that cannot be polished or that should not come into contact with this product (rubber parts, glass surfaces, plastic, license plates, wipers, keyholes, etc.). 3. The body surface is polished to a mirror finish. After finishing work, wipe off all the abrasive and dust with a damp cloth. 4. Fold the application cloth in half, then in thirds and soak it thoroughly in the product. Do not apply the product over a wide area. When applying, move the cloth back and forth, shifting it halfway at a time, to apply the product as quickly and evenly as possible. Do this for each part separately, making sure not to go beyond the part. 5. Use a cleaning cloth to wipe the surface evenly. Use a skylight or incandescent lamp to check for unevenness and ensure the surface is completely wiped clean. If the area is large, such as a hood, divide it in half and wipe it completely once. 6. After application, be careful not to touch the product with your hands or expose it to water or rain. It will dry naturally after about 120 minutes. After drying naturally, repeat steps 4 and 5. *It takes a week for the glass coating to completely harden, so please do not wash or dry wipe the car during this time. *Please be sure to read the attached application instructions for the above glass coating agents and apply them properly. [Number of units that can be used] 2 units with 2 coats of paint 2 genuine application sponges