Replacement Probe PH/ORP Composite Electrode BNC Connector ORP Sensor PH Probe for Fish Tank Aquarium Hydroponic Water Analyzer

Good luck with your favorite purchasesReplacement Probe PH/ORP Composite Electrode BNC Connector ORP Sensor PH Probe for Fish Tank Aquarium Hydroponic Water Analyzer

Please note that there are three models available for selection: ORP Electrode Probe 501-3/PH Electrode Probe E-201-C/PH Electrode Probe E-201 (Optional) The combined electrode is composed of platinum needle indicating electrode and silver-chlorinated silver reference electrode. It is the measuring element of ORP/PH meter & water quality tester, using to measure the ORP/PH of aqueous solution/water. 【Multifunctional ORP Electrode /PH Electrode Probe】:

Widely used to test the the ORP/PH of aqueous solution/water.

Great laboratory ORP/PH electrode probe.

Suitable for most ORP/PH meter and controller with BNC Q9 connector.

Filled with saturated kcl colloidal solution, used for printing circuit board, ORP/PH on line measurement of containing chromium wastewater treatment.

Material is environmental friendly with no harm to human body and great conductivity.

Mainly used to measure water quality, suitable for swimming pools and spas, koi fish ponds, but also for water sources, aquariums, hydroponics, laboratories, seawater, marine/saltwater fish tanks and other water systems. Specifications： 1. Type: ORP Electrode Probe 501-3/PH Electrode Probe E-201-C/PH Electrode Probe E-201 (Optional) 2. Material: PC 3. Type: Laboratory Electrode 4. Probe Type: Sensitive Crystal Ball Bubble 5. Range: 0 ~ ±1999mV/0.01 ~ 14.00PH 6. Accuracy: ±5mV/0.01PH 7. Applicable Temperature Range: 5 ~ 75℃/0 ~ 80℃ 8. Electrode Potential: 245-270mv (15~30℃) 9. Indicator Electrode of Electrode: Good Conduction 10. Length of pH Electrode Line: Approx. 1m 11. Package Size: Approx. 18 * 4.5 * 2.3cm / 7.1 * 1.8 * 0.9in 12. Package Weight: Approx. 150g 13. Package List : 1 * ORP Electrode Probe/1 * PH Electrode Probe(Optional)

ORP Electrode Probe 501-3 E-201-C PH probe Specification : 1. PH Type : PH Electrode 2. PH : 0.01 ~ 14.00 3. Interface Type : BNC Interface 4. BNC Replace Probe Connector 5. Temperature : 0-80°C 6. Size : 190mm/7.48in*17mm/0.67in*17mm/0.67in 7.Package List : 1 * Electrode E-201 PH Probe PH range: 0-14 PH Temperature range: 0-80° Alkali Error: 0.2PH Connector: BNC BNC Connector suitable for most PH meter and controller. Suitable for wide range of application: Aquariums, Hydroponics, Laboratory etc.