Industrial Air Dehumidifier 70L/24H Humberg Hm-482

Industrial air dehumidifier 70 l/24 h Humberg: HM-482 Solution only for professionals. Effectively accelerates the drying of floors, plaster, paints, soaked walls and other rooms exposed to moisture. Very high dehumidification efficiency – 70 LITRES per 24 hours. Allows water to be discharged up to 4 METERS. High mobility – large wheels enabling free movement of the product. Affordable dimensions – will fit even in small rooms, such as a boiler room, storage room, etc. Quiet operation – ONLY 55 dB. Large, removable water tank 5.5 l. Possibility of permanent water drainage – condensation drainage hose included. Functions and operating modes: 24 h timer Operating modes: normal and continuous Hygrostat – measurement and possibility of setting the expected air humidity parameters (from 20% to 90%) Hygrometer – measurement of the moisture content in the air Comfortable handles and wheels for easy movement Practical power cable holder Automatic defrosting Room temperature measurement Water tank overflow protection function Also perfect for rooms below ground level. For: drying damp walls / drying floors / damp basements / rooms after flooding. Pre-filter (washable) protects the dehumidifier against dust and mechanical damage. Up to 3 layers for a longer service life of the device. HYGROSTAT plays a key role in automatically controlling the humidity level in a room. Humidity Monitoring – The humidistat constantly monitors the humidity level in the air. Automatic On and Off – When the humidity level in the room exceeds a set point, the humidistat turns on the dehumidifier. Maintaining Optimal Humidity Level – By precisely controlling humidity, the humidistat helps maintain optimal conditions for drying the building. Two ways of draining water: Water drains into the built-in water tank with a capacity of up to 5.5 l Thanks to the removable 5.5 liter tank, the dehumidifier ensures longer uninterrupted operation, and you can easily empty it when needed. Drains into an external tank using a 400 cm long condensate drain hose. The dehumidifier communicates using an indicator light, audible signal, water level indicator, display, and fan indicator – any professional will use the appropriate indicators to optimize the unit’s operation. Water tank indicator. CONT — Continuous operation. Enables/disables continuous dehumidification mode. MINUS — Humidity/timer adjustment – down. Humidity indicator – range from 20% to 90%. ADD — Humidity/timer adjustment – up. TIMER - Range 0-24 hrs. FULL - Water tank full. The LED is red when the tank is near full. CONT - The green LED is illuminated when continuous dehumidification mode is enabled. DEFROST - The green LED is illuminated when automatic defrost is enabled. TIMER - The green LED is illuminated when the timer is enabled. POWER. Ecological refrigerant: In harmony with nature and with the latest guidelines Our dehumidifier uses R290 refrigerant, which does not deplete the ozone layer (low ODP potential) and has a very low global warming potential (GWP). In terms of cooling efficiency, it is on par with old HCF refrigerants, e.g. R134A, R404A, but is much more environmentally friendly. Our device meets all Polish and EU standards. Technical data: Power supply: AC 220-240V / 50 Hz Dehumidification capacity: 70 l/24 h (30°C, RH80%), 40 l/24 h (27°C, RH60%) Rated power: 759 W Maximum power: 923 W Water tank size: 5.5 l Humidity range: 20-90% Air flow: 450 m3/h Minimum operating temperature: 5°C Maximum operating temperature: 35°C Refrigerant: R290 (280 g) Filter: pre-filter (washable) Noise level: