GodHand (GodHand) Quick Drill Bits (D) Set of 8 (2.1/2.2/2.3/2.4/2.6/2.7/2.8/2.9 mm) (Old Model) ...

GodHand (GodHand) Quick Drill Bits (D) Set of 8 (2.1/2.2/2.3/2.4/2.6/2.7/2.8/2.9 mm) (Old Model) GH-DBQ-8D Hexagon Shaft Special Drill Plastic Model Tool Green

Quick power pin vise compatible drill bit set Uses a blade angle that makes it easy to drill holes cleanly Shaft diameter: 4 mm (hexagonal shaft) Material: special blade steel Country of manufacture: China

Product introduction Product introduction A specially designed hexagonal drill blade that specializes in model making, so you can dig holes with peace of mind without worrying about idle rotation. Set of 8 with a 4 mm hex shaft diameter and drill diameters of 2.1 mm, 2.2 mm, 2.3 mm, 2.4 mm, 2.6 mm, 2.7 mm, 2.8 mm, and 2.9 mm. Since it is a hexagonal shaft, it fits firmly with the connection part, so there is no need to worry about idling, and work can proceed with peace of mind. Compared to general drill blades, the overall length is shorter, and the distance to the target is closer, making it easy to aim and control. Since the tip of the drill blade is designed at an obtuse angle, it can be dug shallowly, and holes can be dug without penetrating even thin plastic plates. Since it digs more slowly than sharp cutting edges, it is less likely to blur and holes are less likely to distort. The edges of the dug holes are also nicely finished. Furthermore, for drill blades of 1.5 mm or more, the cutting edge is increased at the tip, so digging can be carried forward without resistance with light force. Easy to install by simply inserting it into the magnetic “Quick Power Pin Vise” sold separately, very easy to attach and detach from the pin vise, improving work efficiency, and be sure to check the safety warning instruction manual before use. Safety Warnings Please be sure to check the instruction manual before use.