2 Phase Stepper Motor Driver 24-50VDC Stepper Motor Controller Digital Stepper Driver CNC Machine

Label:Yes QUIET LOW-SPEED RUNNING DUAL PWM OUTPUT This microstep driver uses optical isolation with pulse response up to 200KHz. The aluminum housing handles daily wear and holds up in damp settings. This 2-phase stepper driver runs dual constant current PWM output with passive cooling, built for extended use. This digital stepper driver runs at low speeds with minimal vibration and quiet output, so you can focus on the task at hand. Built to handle interference on the power grid, this driver holds positioning tight even in rough electrical conditions. Runs on supply voltages up to 48V with output current reaching 5.6A. The solid build keeps the driver running steady. 5.6A OUTPUT CAPACITY 200KHZ PULSE RESPONSE TIGHT POSITIONING

Item Type: Microstep Driver Model: DM556 Input Current: 18~48V DC power supply, Capacity: Not less than 200VA. Typical Value: DC36V Output Current: 1.0A~5.6A, 8 levels adjustable, resolution 0.5A Drive Mode: Dual constant current PWM drive output Insulation Resistance: >500Mohms at normal pressure and normal temperature Dielectric Strength: 500V/min at normal pressure and normal temperature Cooling Method: Passive Cooling Operating Temperature: 0℃~+50℃ Ambient Humidity: <80% RH, no condensation, no frost Material: Aluminum Color: Black Installation Dimensions:112 x 75.5mm(4.41 x 2.97in) When using DM series drives, the following precautions should be taken: 1. After the user completes the wiring, the motor parameters must be automatically identified through SW4 during the first power on; 2. When users require special current settings and fine segmentation, the dip switch must be set to the default state, And set the current or subdivision through ProT tuner and STU-DM; 3. If users require higher low-speed and high-speed performance, they need to use ProT tuner for Control parameter optimization configuration; 4. The fault indicator light of the DM series drive can describe different faults through different flashing times, When the drive malfunctions, users can promptly troubleshoot based on the fault information.

Package List: 1 x Microstep Driver Note: 1. Use Occasion: Avoid dust, oil mist and corrosive gas 2. Maximum Vibration Does Not Exceed: 5.7m/s2