Submersible Pump Stainless Steel Red Copper Insulated Core Wire for Industrial Agriculture DC12V 300W

Feature: 1. Perfect Configuration: The submersible pump adopts stainless steel body, no rust and corrosion resistance; good insulation performance of core wire; new thickened stainless steel impeller; full copper motor, cold rolled sand steel sheet to upgrade heat dissipation effect. 2. No Noise Pollution: The working sound of the submersible pump is low, the insulation performance of the mini handle is good, the exterior is corrosion resistant, wear resistant, and has high mechanical hardness. 3. 3 Kinds of Joints: There are 3 kinds of water pipe joints in the set, which are suitable for various styles of water pipes, and the pagoda shaped water outlet is convenient for water pipe connection. 4. High Lift: Adopting the swirling countercurrent technology, the drainage is stable, which can greatly increase the pump lift and meet the flushing water requirements,which is suitable for river water intake, garden irrigation, household car washing, farmland irrigation, etc. 5. Floating Ring Structure: The floating ring structure adopted by the coaxial machine of the submersible pump has high mechanical efficiency and volumetric efficiency.

Specification: Item Type: Submersible Pump Material: Stainless steel and red copper Model: NZQB-12L Power Supply Voltage: DC12V Rated Power: 300W Maximum Flow: 30L/minute Motor Speed: 3800r/minute Lift: Approx. 10m / 32.8ft Transport Medium: Clean water pump

How to Use: 1. Check whether the power supply voltage matches the pump.2. Before using the pump, please put the pump into the water first, then power on.3. After using or not using the pump, the battery should not be immersed in water for a long time. After use, please keep the pump away from water and dry it in a ventilated place.

Package List: 1 x Submersible Pump 3 x Pipe Joint 1 x Joint Ring

Note: 1. Prohibition of idling: The idling of the pump motor should not exceed 1 motor, otherwise the oil seal may be damaged. 2. Do not pull the cable when putting in or pulling out the pump in water. 3. If there are debris such as sediment in the water source, please put the pump in a bamboo basket or other anti pollution equipment to prevent clogging. 4. If the lift is too low, please check whether the connecting line is too long or smaller than the pump cable; open the bottom mesh to check whether the impeller is blocked; or the power is insufficient.