10x 10mm 4 Pin 5050/3528 Rgb Led Strip Light Corner Connector L-shaped Design Pbt Fireproof Material Pcb Adapter

Features: 1. 4-pin connector for 10mm wide 5050/3528 RGB LED strips. 2-channel PCB chip with 2 easy snap connectors to seamlessly extend the light strip at sharp corners. With these L-shaped connectors, you can avoid twisting the led strip, which may damage the led strip. Suitable for rectangular, square, corner sections, etc. 2. 4-pin connector for 10mm wide 5050/3528 RGB LED strips. 3. L-shaped design: 2-channel PCB chip with 2 simple snap connectors to seamlessly extend the light strip at sharp corners. With these L-shaped connectors, you can avoid twisting the led strip, which may damage the led strip. 4. PBT Fireproof Material: Made of fireproof material, high temperature resistant. They do not easily. Description: Name: Corner Connector Material ABS, Magnet, Silicone Size 10mm how to use: 1. Open the clip on the side. 2. Cut the 10mm LED strip inside the clip below the two contact prongs. 3. Make sure the sides of the strip are aligned with the positive and negative poles. 4. Close the clamp Packing list: 10pcs x Corner Connector Note: Different displays may cause the color of the item in the picture a little different from the real thing. Manual measuring,please allow 1~3mm error,thank you. Features: ['--Application: Fits the entire 3528/5050 SMD double density RGB LED strip, 10mm wide. ', '--Product quality is high, cost-effective and safe. The LED tape DIY project is perfectly compatible with both waterproof and non-waterproof light strips.', '--EASY TO USE: You just plug the strip light into the connector and off (no soldering required). ', '--Provides a perfect 90-degree bend between two strip lights without soldering', '--perfect for rectangles, squares, corner sections, and more.']