Technical data: Color: yellow Ambient temperature: from -10°C to +30°C Can temperature: from +5°C to +30°C Post expansion: 130-160% Skin formation time: ? 15 min* Pre-treatment time: ? 60 min* Full hardening: after 24h* Thermal resistance after hardening: from -60°C to +100°C Efficiency: 33-45 l (750ml), 21-27 l (500ml)* Thermal conductivity coefficient (?): ? 0.036 W/mk Water absorption after 24h with partial immersion without skin: ? 1 (kg/m2) Fire reaction class: F/B3 (EN 13501 / DIN 4102) * The given parameters were measured in accordance with Selena's internal standards based on FEICA standards and depend on external conditions, the quality of the equipment used and compliance with the instructions. Measurements were made at 23°C and 50% humidity for a ≤ 30 mm hose. Maximum efficiency by the slow foaming method measured under optimal conditions (EN 291). The final result largely depends on the amount of foam wasted (overapplication), can temperature, application temperature, surface, quality of equipment used, and the skills of the person applying the foam. For gaps wider than 3 cm, parameter values may differ from those declared in the technical data table. Tytan Professional STD Hose Foam cures on exposure to moisture and is recommended for a wide range of construction applications: mounting, sealing, filling, and insulating. Thanks to its modern formula, the foam does not run off vertical surfaces, is multi-positional – it can be dispensed with the valve up, and is multi-seasonal – it can be used in both summer and winter. The foam is resistant to mold and fungi, as well as to high and low temperatures (from -60°C to +100°C). Once cured, the foam can be cut, sanded, plastered, or painted. High-quality Tytan Professional STD mounting foam is produced in accordance with the ISO 9001 standard. Advantages: Ergonomic applicator – providing greater comfort of work and a more precise and convenient application Possibility of reuse up to 60 days after the first application Multi-position – application in the “valve up” position in hard-to-reach places, e.g. under the ceiling Multi-season – possibility of working in winter and summer (at temperatures from -10°C to + 30°C) “Ozon-friendly” this means that the product does not contain freons – Chlor-Fluoro-Carbon gases (CFCs and HCFCs), which contribute to the destruction of the ozone layer Application: Sealing when installing window and door frames, window sills, roller blinds, stair steps Filling and soundproofing of partition walls, prefabricated elements in frame structures Thermal and acoustic insulation of floors, soundproofing and sealing of partition walls, car and boat cabins Filling elements in frame structures Filling gaps in wall and ceiling joints and confined spaces (without moisture access) Soundproofing and sealing partition walls, car cabins and boats. 750ML TYTAN FOAM ECOLOGICAL O2 ERGO MULTI-SEASON ** Illustrative photo
Prece no Polijas
Nedēļot atgriešanu
