Swimming pool, fish pond pollution machine filtering device suction cleaner for underwater vacuum pump High Power Triangle family expenses

Note: Because the telescopic rod is too long to be packaged with the machine, please contact customer service after placing an order and let the customer service arrange for you to mail the telescopic rod separately.

The customer service needs to obtain your consent before they can deliver the goods to you separately, so you must contact the customer service, otherwise the telescopic rod cannot be delivered.

Buying advice:

(Choose according to the size of your pool)

55W: Applicable area of 10 square meters, pool width within 3 meters

100W: Applicable area of 15 square meters, pool width within 6 meters

150W: Applicable area of 20 square meters, pool width within 6 meters

200W: Applicable area of 30 square meters, pool width within 6 meters

If you need a larger area of pool sewage suction machine, you can contact customer service for consultation!

Option：

55Watts Package1 （10M Power Cord）

55Watts Package2（10M Power Cord+Filter Bag+Shallow water network ）

100Watts Package1（10M Power Cord +Filter Bag+Shallow water network）

100Watts Package2（10M Power Cord+Filter Bag+Shallow water network+Pool Brush ）

150Watts Package1（10M Power Cord +Filter Bag+Shallow water network）

150Watts Package2（10M Power Cord+Filter Bag+Shallow water network+Pool Brush ）

200Watts Package1（10M Power Cord +Filter Bag+Shallow water network）

200Watts Package2（10M Power Cord+Filter Bag+Shallow water network+Pool Brush ）

3M Telescopic Rod

Suction head: triangle

Telescopic pole length: 3M

Corrugated sewage pipe: 7.5M

Power cord: 10M

Installation Instructions for Small Sewage Suction Machine

In order to give full play to the functions of this product, please strictly follow this manual to install correctly

installation steps :

1. Open the cover of the water pump, install the long connector of the interface to connect to the water pump port, and the short connector to the side

2. Install the water pump on the suction head.

3. Install the sewage pipe at the outlet of the water pump and tighten it with a round hoop.

4. Connect the telescopic rod with the dirt suction head.

5. It is recommended that the sewage suction machine is to submerge the pump and use it in a standard manner.

6. The filter bag is attached to the outlet of the sewage pipe to allow water to circulate (please ignore the package without filter bag)

If the product will not be installed or used after receipt, you can contact customer service to ask for installation instructions and installation videos.

Product precautions and daily maintenance:

1. Do not use in a pool with a water depth of less than 35cm, that is, the water depth should completely submerge the pump body of the whole machine

2. It needs to be gently pushed when in use, and handled gently when retracted

3. Do not suck dirt on the wall, otherwise the interface will break due to gravity

4. After sucking the dirt, please be sure to disassemble it and clean up the adhering garbage sediment

Note:

-Due to differ