Zvs Tesla Coil Power Supply 1000W Tapless Zvs High Voltage Generator Driver Board High Frequency Induction Heating Drive

Features: 1. High efficiency: ZVS Tesla coil power supply 1000W tap-free ZVS high voltage generator drive board adopts high efficiency ZVS technology, with high energy conversion rate. 2. Safety and stability: it has high-quality circuit design and protective devices, which can prevent the circuit from burning down and provide stable and safe power output. 3. No tap design: no tap design can eliminate spark splash caused by poor contact of electric wires, ensuring the service life and safety of products. 4. High power: 1000W high power design is adopted to meet the high voltage demand and the use demand of various high voltage equipment. 5. A variety of applications: it can be used to drive Tesla coil, Jackson coil, gas discharge and other high voltage generators, and has a wide range of application fields. Product Description 1. It is made of military-grade 1.6mm double-sided glass fiber board. 2. The large inductance customized by the factory is adopted, and the performance is more stable with consistent parameters (30mm large magnetic ring, wound by 1.2mm pure copper wire). 3. All resistances adopt five-ring tight resistance (the error of five-ring resistance is small, and the operation is more stable). 4. Tin is added to all the over-current parts at the bottom of the circuit board (it can be used for induction heating. In order to save costs, merchants can only drive the high-voltage package without opening windows and adding tin. Once used for induction heating, it will burn out, because it is not enough to rely solely on copper sheet for over-current. 5. Generally, 12-30V DC power supply is adopted, and the current also needs to be above 10A, which is more appropriate, because the drive board works in the Zero Voltage switch state (Zero Voltage Switching), and its efficiency is yes, other drives can not be compared, the higher the Voltage, the longer the arc is pulled (I personally test that using 27V/1 Switching power supply can pull the arc above 80mm without heating), it can also be used for induction heating or quenching, which is also the higher the voltage, the faster the heating, and the greater the heating at the same time. It is recommended that the diameter of the heating solid object should not exceed 2/3 of the coil. Product Parameters 1. Input voltage: 12V -30v recommend above 24 v30A 2. Power supply requirements: 12v ÷ 5A;15V or more ÷ 15 3. Operating frequency: 30 khz-50 khz 4. Secondary parameters: 5t +5t 5. Product power: 1000W(MAX) 6. Product Specification: 85mm × 69mm 7. Product weight: 127g / 4.47oz 8. Packing size: about 15.5 × 11 × 2.5cm 9. Packing weight: 185g Package includes: ZVS high voltage generator drive plate * 1 The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.