CONCEPT Super 125g with Rotating Mount Inch Screw Maximum Clamping Width Silicone Attaches to Compatible with LED Smartphone Action Aluminum Load

[Sturdy and stable with a 5kg load capacity] The main body is made of high-strength aluminum alloy. It has a load capacity of 5kg! It can firmly support most devices and accessories such as commercially available monitors, LED lights, smartphone holders, and action cameras. Despite its sturdiness, it has a lightweight design with a weight of only 125g. [Wide Compatibility and Expandability] The clamp body comes standard with two 1/4-inch holes and one 3/8-inch screw hole. When combined with the included mounting block (rotating type), equipment can be directly attached without the need for a magic arm or similar device. It can be fixed to tripods, desks, railings, etc., allowing for flexible layout of monitors, auxiliary lights, and other equipment. [Non-slip and scratch-resistant with silicone pads on all contact surfaces] High-quality silicone pads are fully installed on the clamp's gripping surface and the contact surface of the mounting block. The strong grip provides increased stability and eliminates worries about scratching equipment or mounting surfaces. It can be used safely even on delicate furniture and painted surfaces. [Detachable Mounting Block - Compatible with Both Flat and Round Pipes] When the rotating mounting block is attached, it can clamp up to 50mm on flat surfaces, and up to 60mm when the block is removed. It can securely clamp not only to flat surfaces such as desks and lumber, but also to round pipes with a diameter of 20-60mm, tripod legs, and even tree branches. You can flexibly add equipment regardless of the location, whether on site or in the studio. [Amazingly Lightweight at 125g & Convenient for Portability] Weighing only 125g, it won't be a burden even when placed in a bag or equipment case. It truly shines in situations where portability is frequent, such as field photography, on-location studios, and live streaming. Easier and more reliable professional equipment mounting. This flat-mouth vise clamp, featuring a machined aluminum alloy body, combines a high load capacity of 5kg with an ultra-lightweight design of 125g. The detachable rotating mount block (multi-mount block) allows it to fit a wide range of subjects, both flat and cylindrical. Key Features: Aluminum alloy body: Rust-resistant, maintaining stable clamping force even after long-term use. Two 1/4-inch + one 3/8-inch screw holes: Allows direct mounting of various accessories such as monitors, LED video lights, microphones, action cameras, and smartphone holders. Full silicone padding: Anti-slip and scratch-resistant silicone is placed on the clamp tip and mount block surface. Securely holds while protecting valuable equipment and furniture. Maximum clamping width of 60mm (without mount block): Accommodates thick tabletops and pipes. Recommended clamping range: Flat plate (when using blocks): 0-50mm (maximum 50mm) Cylinder (pipe/leg): 20-60mm in diameter (maximum 60mm when not using blocks) *Round objects with a diameter of less than 20mm may slip and have reduced stability. It is recommended to use blocks to increase the thickness.