Incubator Digital Temperature Controller Thermostat Switch Tester AC 110V 220V

Name: Incubator Digital Temperature Controller Thermostat Switch Tester AC 110V 220V
SKU: 68cd09fcddc08e01d2faef8d
Price: 130 SEK
Availability: InStock

Nuvarande pris

Pris 130 kr

inklusive moms

FärgSom på bilden

5 holes Sandpaper 14cm× 9cm High quality Durable Practical Muti-fuction
Armbandsur Seiko Selection S-serien Batteridriven Kvarts Kronograf Tre SBTR041 Silver [Seiko Watch] Herr (Vertikala ögon)
For Toyota RAV4 XA50 Accessories LED Daytime Running Lights Car Engine Cover Decoration Light Turn Signal
1/3/5m Meter DC 3.5mm x 1.35mm Male to Female Power supply Connector adapter charging 22awg Cable lead Extension Cord for Camera
Nike Air Max 90 SE Alla hjärtans dag Damsneakers Fritidsskor CI7395-100
Adidas 8-Bit Folietryck Sport Rundhals T-shirt Internationell Storlek Herr Toppar Vit Guld FN1736
Herrvinterjacka i dun och bomull: Varm affärsrock för medelålders och äldre (Åldrar 50-60)
Skechers Slip-Ins: Slade - Deacon, Mens black Sneakers
Rustik Julgranskrage 28 tum Vävd Vide Gransfotsskydd För Konstgjord Högtidsdekoration Ring Kjol Korg För Gran, Naturlig & Stabil
Protocol for Life Balance, Natural Progesterone, Liposomal Skin Cream, Unscented, 3 oz (85 g)

Leverans över 🇸🇪 Sverige

10‑16 arbetsdag 一 40 kr

Dina betalningar och din integritet är säkra

Återbetalning vid utebliven leverans

Kvalitetsgaranti

Säker logistik

Integritetsskydd

Säkerhet och efterlevnad

Beskrivning

110V 220V Incubator Digital Temperature Controller Thermostat Switch Probe Tester

Description: ·Size: As shown in the picture ·Supply Voltage: AC 110V/220V, switched automatically ·Temperature Measurement range: -50~ +110 degree Celsius ·Temperature Control Range: -50~ +110 degree Celsius ·Control Accuracy: 0.1 degree ·Measuring Input: NTC10K ·Output Type: Direct Output ·Output Capacity: MAX10A

Instructions: 1.Set the startup temperature: Press UP key once to start the display temperature. Press and hold UP key for about 3 seconds to start the temperature digital flashing. Use UP/DOWN key to set the desired temperature value.

2.Set the stop temperature: Press the DOWN button to display the stop temperature. Press and hold the DOWN button for about 3 seconds to stop the temperature digital flashing. Use the UP/DOWN keys to set the desired temperature value.

3.How to restore the factory settings: When power is on, press and hold UP/DOWN at the same time, the digital tube display 888 will then automatically jump to the detected temperature, that is, restore the factory settings.

Package Includes: 1 x W3001 110V/220V Incubator Digital Temperature Controller

Rapportera olagligt innehåll