Eibach Standard Spring Erl Seat/Vw Rear R10900

• Unless otherwise stated, the lowering value given in our catalogue for vehicles with factory (standard) lowering suspension will be less than the factory lowering value. Unless otherwise specified, products from this catalog are not intended for vehicles with factory (serial) lifting suspension (e.g.

Offroad, Crossover packages).

• When selecting a product, please base it on the data in the TÜV certificate or ABE document.

• Before installation, please compare the markings on the received product with the markings in the TÜV or ABE document (included in the packages).

• If any discrepancies are found, the kit should not be installed.

• Installation should be carried out in a specialized workshop with qualified employees and the appropriate tools.

• The installation position (top-bottom) is marked with a print - the text arrangement suggests the correct position.

• After installing the springs / suspension components, check the wheel alignment.

• If the original shock absorbers are heavily worn, it is recommended to install new ones - standard or sports.

• For the Sportline series springs, we recommend purchasing sports shock absorbers, e.g. Bilstein B8.

• All wheel / tire combinations permitted by the manufacturer are possible after installing the springs.

• Depending on the engine version, gearbox, equipment and vehicle manufacturer's tolerances, the lowering values ​​may differ by a few mm from the values ​​indicated in this catalog. The lowering value will be relatively lower in the case of a standard (factory) lowering.

• The use of our products refers to production vehicles. In the event of modifications to the vehicle or additional equipment (this also applies to original products offered as an option by the vehicle manufacturer!), such as a reinforced braking system (e.g., ceramic discs), single-hole wheel mounting, sports suspension, LPG system, etc., it is possible that installation of our products will not be possible.

All data provided refers to new, factory-fitted vehicles. Measurement points: a straight line connecting the center of the hub to the lower edge of the fender. These are approximate values ​​- they may vary depending on the vehicle.

• If the standard suspension in your vehicle has electronic damping force control, using the B12 or Pro-Street-S suspension will result in the loss of this function. The error displayed on the on-board computer after installation can be cleared at an authorized dealership.

If available for your vehicle, we recommend using the Pro-Tronic kit to clear the error.