Features:
1. Easy to setup.
2. Long service life.
3. Waterproof design.
4. Convenient to carry and use.
5. Universal automatic compatible with control.
6. For garage door, alarm, automatic door, rolling door, etc.
Product description:
1. Compatible with multiple brands, through key operation, it can be set to any brand or frequency in the list.
2. Rate of remote control.
3. Reverse check function, you can check the brand of the current remote control by pressing the button.
4. Compatible with multiple frequency bands, the frequency range is 240-930MHz.
5. Support: FSK, GFSK, OOK mode.
Specifications:
1. Working voltage: 3V
2. Static working current: 0A
3. Working temperature: -40 Celsius-+80 Celsius
4. Frequency deviation: plus-minus 0.2MHz
5. Working frequency: 315MHz, 433MHz (optional)
6. Encoding chip: MCU/compatible with 60 brands
7. Launch distance: 100 meters (open);
8. Dimensions: 65.5*38.5*14 mm
9.color:Black,blue,red
How to use:
1. Setting mode:
Press 1 and 2 at the same time, then keep pressing 1 and press 2 four times in a row, (or keep pressing 2 , put it down, press the 1 key four times in a row), then enter the setting mode (the indicator light turns to green light): then press in order The button representing the number can be set to the remote control of the brand and frequency you need. For example: press in order 1-4-1-2 key, after the operation is completed, the indicator light flashes slowly 3 times, indicating that it has been successfully set to HS1527 brand. Remote control with 433.92MHZ frequency.
Note:
a. After the remote control is set up successfully, it needs to be paired with the original controller for learning once before it can be used.
b. It has been set and used once, if you want to go back and use it for the second time, it is not necessary to reconnect with the original controller under normal circumstances
c. It can be used directly after matching. If it cannot be used in some cases, please match it with the original controller again.
2. View mode:
Press 1 and 2 at the same time, then keep pressing 1 and press 2 three times in succession (or keep pressing 2, Put it down, press 1 button three times), and then release the button to enter the viewing mode: the remote control will flash red light four times and pass.
The number of flashes each time indicates the current remote control number, for example: if the remote control number is 1412, enter the viewing mode.
After that, the first flashes 1 time, the second flashes 4 times, the third flashes 1 time, and the fourth flashes 2 times.
3. Note:
A. After entering the viewing or setting state, if there is no operation within 10 seconds, the green light flashes five times and exits, and the indicator light goes out.
B. When setting the brand number, if the number is out of the allowable range of the list, the green light will flash five times and exit, and the indicator light will go out. Indicates that the setting has failed, and the remote control retains the last brand setting value.
C. In the viewing mode, if a button is pressed during the display, the subsequent display will be ignored and the setting mode will be entered directly. In addition, after the display is completed, it will automatically enter the setting mode.
Product List:
1 * Garage Door Remote Control
(Not including 2032 button battery)
Notes:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
