【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
The V9's driver IC has voltage adaptation and will automatically adapt to the target board's CPU voltage if wired correctly. Can debug 1.8-5.5V CPU. The main control chip uses STM32F205, the firmware is not lost, and the hardware has been upgraded to the latest version V9.4.
Programmer V9 is compatible with JLINK V9 and can be used to program many chips. Supports almost all ARM chips. ARM7/9/11, ortex-A5/A7/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4, Microchip PIC32, and Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630 Including /RX631/RX63N etc.
Voltage self-adaptation feature automatically adapts to the target board's CPU voltage if wiring is correct. You can debug CPUs from 1.8 to 5.5v.
Supports standard JTAG interface and 2-wire SWD debug interface. The speed reaches 20M(JTAG)/15M(SWD) per second.
In addition to MDK and IAR compilation environment software, it also supports other compilation environments supported by standard j-link. Adopts the latest version of firmware and supports automatic firmware upgrade.
The V9's driver IC has voltage adaptation and will automatically adapt to the target board's CPU voltage if wired correctly. Can debug 1.8-5.5V CPU. The main control chip uses STM32F205, the firmware is not lost, and the hardware has been upgraded to the latest version V9.4. Programmer V9 is compatible with JLINK V9 and can be used to program many chips. Supports almost all ARM chips. ARM7/9/11, ortex-A5/A7/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4, Microchip PIC32, and Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630 Including /RX631/RX63N etc.
