Joom: هذا الجهاز ليس بديلاً عن النصيحة الطبية المهنية، أو التشخيص، أو العلاج. يرجى استشارة متخصص صحي مؤهل قبل الاستخدام إذا كانت لديك أي شكوك. البائع/الموزع غير مسؤول عن أي أضرار تنشأ عن سوء الاستخدام أو التعديل غير المصرح به، أو الاستخدام بما يتجاوز التعليمات المحددة.
-----
Blackhead and blackhead remover
6 functions of suction heads
Microcrystalline beauty suction head
Microcrystalline can gently remove aging skin keratin, making the skin delicate and smooth.
Oval hole beauty suction head
Mainly used to remove fine lines, it is necessary to suck the skin and then quickly pull it away repeatedly, which can promote skin blood circulation and increase skin elasticity.
Large round hole beauty suction head
Strong suction, used to suck blackheads and tighten V-face. When sucking blackheads, you need to move slowly backwards on the skin. Do not use it on the same part for a long time.
Medium round hole beauty suction head
Strong suction, used to suck blackheads. For those with acne and excessive oil, do not use it on one part for a long time. Use the lifting technique from bottom to top.
Small round hole beauty suction head
Weak suction, used to suck blackheads, such as thin and tender skin, sensitive skin, do not use too strong suction, just use a small suction head
Mini small round hole beauty head
Weak suction, used for sensitive skin or those with fewer blackheads.
Blackhead and blackhead remover
The latest facial cleanser, providing stronger and more stable pore suction, bringing better acne and blackhead removal effect. This vacuum blackhead remover can effectively remove stubborn blackheads, whiteheads, dead skin, oil and makeup residue, smooth wrinkles and tighten skin.
Usage tips
1. First, you need to expand the pores (hot shower, apply hot towel to face, etc.).
2. Select the suction nozzle.
3. Turn on the device to the desired mode.
4. Do not stay in one position for more than 3 seconds.
5. After using the cleanser, you must thoroughly wash your face and suction nozzle.
6. Before using the device, please charge it with a USB charger (data cable included), then press the upper button to turn on the device and press the lower button to select the mode. Start with the weakest and gradually increase.
Microdermabrasion
This treatment is not suitable for people with thin and sensitive skin, damaged skin or inflammatory herpes on the face. It is prohibited for patients with rosacea and dermatitis.
The treatment consists of three stages:
1. Cleanse the skin of make-up and dirt and treat with an antibacterial toner (chlorhexidine can be used)
2. Microdermabrasion with a suction nozzle
3. Apply a soothing mask or cream
After the treatment, use sunscreen and moisturizer before going out. Immediate use of make-up products is not recommended.
Skin-friendly
The Vacuum Pore Cleanser works by removing excess fat from the surface of the skin to prevent redness, inflammation and blackheads. With this device, you can get a complete facial skin care without leaving home.
Full display
How to use
How to use the Vacuum Pore Cleanser
!!! Start with the lowest speed and gradually increase the speed to avoid damaging the skin!!!
Cleanse and steam your face before the treatment
1. Thoroughly cleanse your skin of make-up and dirt using your usual cleansing product (cleansing foam, gel, toner, depending on skin type).
2. Steam your face with a hot towel (apply it to your face, wet it with hot water first, or directly with warm water, and leave it on for 5-10 minutes) or a special lotion to open your pores.
3. Dry your skin thoroughly and leave it completely dry.
Cleaning steps
Charge the device before use.
1. Select the appropriate cleaning and disinfection attachment and install it on the device.
2. Press the power button (top button).
3. Select the suction level (bottom "M" button):
There are three suction levels:
- "Strong" YX, suitable for oily skin
- "Medium" GX, suitable for all skin types, including normal and combination skin
- "Soft Neutral" ZX, suitable for dry skin.
4. Carefully place the suction head on the problem area and start working on the blocked area, moving the vacuum cleaner continuously.
5. Slowly move the suction head in the direction of the massage lines, avoiding the eye area (from the center outwards).
6. Do not stay in one position for more than 3 seconds! Otherwise, bruising may occur.
7. Do not press the vacuum cleaner onto the blackhead and hold the nozzle, but move it around the blackhead in smooth and gentle circular motions.
8. It is recommended to vacuum cleanse on clean and dry skin. Continuous movement is the key to success. Never stay for too long and do not press too much in one place, as this can cause injuries and bruises.
9. The last step is additional mechanical cleaning (if necessary)
10. After the treatment, apply a soothing mask or a moisturizer with hyaluronic acid.
11. If you need to go out in the sun, it is recommended to apply sunscreen.
12. Wash the used vacuum nozzle and disinfect it thoroughly with chlorhexidine solution.
Facial microdermabrasion
Contraindications:
Severe acne
Inflammatory skin
Herpes
Rosacea
Eczema
Rosacea
Dermatitis
Performing microdermabrasion:
1. Cleanse the facial skin thoroughly and wipe it with an antibacterial toner (chlorhexidine solution can be used).
2. Install the microdermabrasion nozzle (with crystal coating).
3. Move the microdermabrasion device:
- from the chin upwards,
- along the cheeks from the inside to the outside,
- along the forehead from the middle to the sides,
- in the T-zone from the bottom to the top.
4. After the operation, use 0.05% chlorhexidine solution to care for the skin.
5. Tone and soothe the skin: use a moisturizing toner or soothing serum to balance the skin's pH and reduce redness. The first ingredient recommended after the operation is hyaluronic acid.
6. Important: In the first few days after the operation, it is recommended to apply a cream with SPF sun protection before going out.
Steps to clean blackheads and acne
1. Install a large nozzle.
2. Aim the nozzle at the acne area, adjust the power as needed, and move the device slowly over the acne area, but do not move it back and forth.
3. Move the head according to the skin texture.
4. Use 0.05% chlorhexidine solution to care for the skin after surgery.
Wrinkle massage method
As with all treatments, this treatment needs to be performed on clean skin without steaming the face.
1. Install the oval nozzle.
2. Hold the device in your hand and use it on the corners of the eyes, nose wings, mouth and nose, and other sensitive areas, adjusting the power as needed. You can touch the head, lift the skin, and remove the head. This repetitive operation affects the lower layer of the skin, helps to strengthen the skin, increase elasticity, and prevent wrinkles.
3. After surgery, it is recommended to use moisturizing or nourishing products such as lotions, gels, and creams.
After surgery:
Wash and disinfect the used vacuum nozzle with chlorhexidine solution.
It is recommended to do it at night so that the skin can be soothed under the effect of the mask.
Before going out in the sun, apply a sunscreen with a sun protection factor (SPF).
