M5Stack Cardputer Adv Kit Cap LoRa1262 LoRa Programmable Card Computer StampS3A IoT Controller Microcontrolle Development Kit

High-concerned chemical : None Model : Cardputer Adv LoRa1262 kit Type : ESP Series Origin : China

M5Stack

M5Stack Cardputer Adv and Cap LoRa-1262 Kit

Kindly Remind FQA, Cardputer ADV won't boot? at the bottom of the page.   Product Comparison

Product Features  Stamp-S3A core controller 56-key keyboard 1.14" LCD display 160gf comfortable keypress feel ES8311 audio codec High SNR MEMS microphone NS4150B amplifier + 1W speaker 3.5mm audio output interface Infrared emitter 6-axis motion sensor BMI270 HY2.0-4P Grove port EXT 2.54-14P expansion bus microSD card slot Built-in 1750mAh Li-ion battery Magnetic back design LEGO hole compatible Development Platform

Arduino UiFlow2 ESP-IDF PlatformIO

Applications  Rapid prototyping and functional verification Industrial control and automation Embedded systems development and learning Wireless communication and IoT projects

Package Includes

1 x Cardputer-Adv1 x Cap LoRa-12621 x LoRa Rubber Antenna

Specification

Product details

Kindly Remind Download Mode To enter download mode, set the side power switch of the Cardputer-Adv to the OFF position. Then, before powering on, hold the G0 button, apply power to the device, and release it afterward. The device will then enter download mode.   Speaker FeatureWhen a 3.5mm headphone jack is inserted, the speaker amplifier will be disabled.

Product Description  CardputerAdvis a programmable card-sized computer powered by the Stamp-S3A core module (based on ESP32-S3FN8). It integrates a 1.14" LCD display and a 56-key minimalist keyboard for convenient interaction and input operations.In terms of audio, it features an ES8311 audio codec, a high SNR MEMS microphone, an NS4150B amplifier, and a 1W speaker, providing high-quality audio input and output capabilities. Additionally, it has a 3.5mm audio output jack for connecting external headphones or speakers.Internally, it is equipped with a 1750mAh high-capacity lithium battery, combined with a low-power design and an independent power switch to ensure good battery life. It integrates a 6-axis motion sensor BMI270, an infrared emitter, a microSD card slot, and also provides an HY2.0-4P Grove port and an EXT 2.54-14P expansion bus for connecting sensors and other peripherals.The base contains magnets for metal attachment and is compatible with LEGO hole extensions. This product is suitable for quick function prototyping, industrial control, home automation, and other scenarios.  M5Stack Cap LoRa1262 LoRa

Product Features

Integrates LoRa modulation technology and GNSS global positioning system Operating frequency: 868 ~ 923 MHz Supports FSK, GFSK, MSK, GMSK, LoRa, and OOK modulation modes LoRa receiving sensitivity: down to -147 dBm (LoRa low data rate mode) LoRa maximum transmission power: +20 dBm External SMA antenna interface for LoRa, built-in ceramic antenna for GPS Positioning supports multiple satellite navigation systems (GPS / QZSS / BD2 / BD3 / GAL / GLO) Multi-frequency and multi-system reception HY2.0-4P expansion interface Development Platform: Arduino UiFlow2

Package Includes

1 x Cap LoRa-12621 x LoRa Rubber Antenna

Specification

Product Comparison

Product details

Real Photos

Safety Warning  Do NOT connect or power on the device without installing the antenna, as this may cause permanent hardware damage!

FAQ  Q1: Why is my Cardputer Adv black screen/won't boot? Solutions: 1. Install the device driver. 2. DownloadM5Burner, One-Click Reburn the factory firmware.

Notice

Otherunofficial firmware. Flashing unofficial firmware can void your warranty, cause instability, and expose your device to security risks. Proceed with caution.