3.2V 3.7V Solar Lamp Control Board Remote Control Solar Induction Controller Human Induction Integrated Street Lamp Light Control for Home Wall Lamp Lights for Solar Power Equipment
Feature:
1. Remote Control: This solar power circuit board comes with a remote control, which can control the operation of the circuit board at any time. To provide more protection for users, so that the use of more convenient.
2. Multifunctional: Every button on this solar power LED driver panel is smart. Induction highlight and low light modes can be used for 2 hour, 3 hour and 4 hour buttons respectively. At the same time there is a dark long bright no induction mode. In use, you can also switch to induction high and low light modes after 2 or 3 hours of long light. Every button of the circuit board remote control can meet your needs.
3. Simple Installation: The design of this sensor circuit board is simple, only need to install the battery, then connected to the LED light and circuit board can be used. It has no tedious instructions and is suitable for our daily life. The simple installation method saves a lot of time and effort.
4. PC and ABS Material: This radar sensor module is made of ABS material and PC material. It is well made and of fine workmanship. Very wear-resistant. It is an economical and practical tool.
5. Compact and Portable: The weight of this solar circuit board is very light, only 35 grams. It's also small in size and volume. So it's very easy to carry. Whether you keep it in your pocket or in your toolbox, it won't take up space.
Specification:
Origin: Mainland China
Applied battery voltage: 3.2V lithium iron phosphate battery/3.7V lithium battery.
The circuit board does not have overcharge and over-discharge protection. The battery needs a protection circuit to prevent overcharge and over-discharge.
Applied LED voltage: 2.8V-3.3V. Power <10w
Solar panel power application: 5V-6V/<20W
Sensing method: light control sensing + radar body sensing
Sensing distance: 5-10M
Sensing time: high brightness for about 10 seconds + low brightness for a long time
Material: PC+ABS
Circuit board size: about 65*20mm
Remote control power supply: 2*AAA dry batteries (not included, need to be prepared by yourself)
Remote control size: about 104.00x37.50x10.00mm
Remote control size: 4.09x1.48x0.39inch
Test precautions:
1. Test In the sensing mode, there should be no moving objects within 12 meters, including the movement of hands and feet, otherwise they will be detected
2. When multiple sensing modules are together, mutual interference will occur, resulting in insensitive sensing or false triggering
3. The surface of the patch component is the transmitting surface, and adhesives and glue cannot be attached to this side, otherwise the sensing distance will be shortened
4. The front and back of the sensor should be at least 2CM away from the metal
5. There should be no metal blocking on the surface of the patch component, otherwise the detection signal cannot be emitted, resulting in a shorter sensing distance
6. The sensing signal can penetrate glass, plastic walls, etc.
Note:
Due to different monitor settings and lighting conditions, the actual color of the item may vary slightly from the pictures. Thanks for your understanding!
Please allow a 1-2 cm difference in measurements due to manual measuring.
Vrácení peněz při nedoručení
