1016V Delay Off Time Relay Module Timer Switch DPDT 2 Channel Output

Feature: 1. Poweroff delay disconnection, there is signal ON, no signal delay OFF. 2. Double output contacts. 3. Each channel maximum current is 5A. 4. Adjustable time range 0300300 and time unit secondminute. 5. Rotate the adjustable resistor to setup delay time. Specification: Item Type: Delay Off Relay Module Voltage: 12V DC (1016V) Power Consumption: <1.0W Output: Passive Output (dry contact), two sets of relay NO + NC output. Do not exceed 5A in each group. Life: 100,000 actions Input: Voltage signal, valid signal above 1.5V, current needs at least 0.1mA Terminal V+: Power supply + GND: Power supply , also the reference GND for the signal voltage IN: Signal voltage input, low level below 1V, high level above 1.5V, and uncertainty in the middle. Withstands up to 30V NO1: Relay NO contact 1 NC1: Relay NC contact 1 COM1: Relay contact common terminal 1 NO2: Relay NO contact 2 NC2: Relay NC contact 2 COM2: Relay contact common terminal 2 Time Range Setting: When the selector switch is set to 30 position, it means that 030 is adjustable When the selector switch is set to the 300 position, it means that 0300 is adjustable Time Value Adjustment: Turn the adjustable resistor counterclockwise to decrease the time and clockwise to increase the time Time Unit Setting : When the selector switch is set to the Sec position, the unit is: second When the selector switch is set to the Min position, the unit is: minute Example: Requires a delay of 50 minutes: 1. Set time range at 300 position 2. Set time unit at Min position 3. Adjust the adjustable resistor to the 50 position. Application: Use with limit switch and induction switch to achieve: 1. Automatically close the door after timeout 2. Assembly line product interruption monitoring 3. Waterair flow interruption monitoring. Package List: 1 x Delay Relay ModulePoweroff delay disconnection, there is signal ON, no signal delay OFF. Double output contacts. Each channel maximum current is 5A. Adjustable time range 0300300 and time unit secondminute. Rotate the adjustable resistor to setup delay time.