【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
Introducing the top model ``George'', a stand-alone clothes steamer with an integrated hanger rack from a French manufacturer specializing in clothes steamers. Updated various functions. A stylish design that blends into your room. Make daily clothing care fun and time-saving.
The amount of steam can be switched in 3 stages: approximately 27g, 18g, and 10g/min*. Equipped with auto start & stop sensor. When you place the steam head on the holder, it goes into standby mode*, and when you remove it from the holder, it will automatically spray the normal amount of steam. Continuous steam injection is also possible with the sensor turned off and the device left in the holder. *Varies depending on usage environment and conditions. *In standby mode, a weak amount of steam is being sprayed.
Eliminate weight stress with a large capacity stand-alone tank. The transparent tank makes it easy to see how much water is left, and is removable for easy water refilling. The 1.2L tank can be used for approximately 40 to 50 minutes after being filled*. The installation surface is less than A4 size, so you don't have to worry about where to put it. When the LED on the main unit lights up in waves, it is a notification that it is time to refill water. *Varies depending on usage environment and conditions.
A lamp notifies you of maintenance timing. When the cumulative usage time reaches approximately 30 hours, the spanner mark on the main unit lights up red. Attach the tank filled with water and open the cap on the bottom of the main unit to wash away the dirt inside and complete the maintenance.
Comes with a safety stop function for peace of mind. When the water in the tank runs out, the power will automatically turn off to prevent empty firing. Similarly, the power will turn off after approximately 3 minutes in standby mode*, preventing any accidents. *In standby mode, a weak amount of steam is being sprayed.
