----------------------------------------------------------------------
【JOOM Approved! Sold & Shipped by Trusted Japanese Sellers】
🔹 Operated by Verified Japanese Sellers – Approved by JOOM, our experienced Japanese sellers provide reliable service.
🔹 Direct Shipping from Japan – Carefully packed and promptly shipped straight from Japan.
🔹 Japanese-Standard Quality Control – Strict inspections ensure only high-quality products reach you.
🔹 About Included Manuals – If a manual is included, it will primarily be in Japanese. We recommend using image translation apps if needed.
----------------------------------------------------------------------
✅ [High-quality preamplifier] "Cloudlifter CL-1" is a standard model in the Cloudlifter series released by Cloud Microphones, which has received tremendous support as a microphone booster. An in-line mic preamp that uses phantom power (48v) to convert up to +25dB of ultra-clean gain and boost your audio signal.
✅ [Up to 25dB amplification while maintaining clarity] Adds up to 25dB gain to passive microphones with low output such as dynamic microphones and ribbon microphones. By amplifying the microphone signal while keeping it clear before inputting it to the preamplifier, the original performance of the microphone is maximized.
✅ [Useful in situations where you are troubled by noise] Useful in situations where you are using a passive microphone and are bothered by noise, such as situations where the output level of the microphone being used is low or the preamplifier being used is noisy, or as a countermeasure against noise picked up by long cables, such as on live stages and recording sites. Also, since the microphone signal can be boosted immediately after the sound source, it has the effect of suppressing noise, and is also effective for XLR lines for acoustic guitars.
✅ [Easy, just connect! ] It's very easy to use, just connect your audio interface and microphone with an XLR cable, and then turn on the phantom power switch on your audio interface. This alone can significantly increase the volume of a low-pitched passive microphone. ※※※Note※※※This unit requires phantom power.
✅ [The Cloudlifter series has sold over 300,000 units worldwide] It is loved by not only YouTubers and podcasters, but also musicians, PAs, and recording engineers, and is used for a variety of purposes from world-class concert halls to radio production.
✅ [XLR cable to choose from] You can choose from two types of cable: CANARE, which has a clear high range, or Gotham, which has a natural and wide range. Both manufacturers use Neutrik connectors, and the products are soldered and assembled by reliable domestic specialty stores.
✅ [Product Overview of the Cloudlifter Series] - Can be used with low output passive microphones such as dynamic microphones and ribbon microphones - Amplifies output passive microphone signals up to 25dB using phantom power - Durable and portable for use in studios, stages, broadcast stations, etc. - Remarkably clean and amplified audio signal - Ideal for recording directly in your DAW using low output dynamic microphones. - Phantom power is not applied to the microphone side, protecting the delicate ribbon microphone from damage.
✅ [MADE IN USA] Cloud Microphones' award-winning ribbon microphone and Cloudlifter series
✅・Please note that the level of muffled sound is affected by the usage environment and connected devices. If the sound is muffled, increase the volume itself rather than the gain, adjust the volume to a level that will not be drowned out by the surrounding sounds, and make sure that a clean tone is produced at a volume that is not drowned out by the surrounding sounds. Also, check the tone control of the sound and adjust it to improve the muffledness. Also, please note that the sound emitted from the amplifier is greatly affected by the surrounding environment, so the way the sound is heard and felt may differ depending on the listener.
✅・If you are concerned about noise such as white noise, depending on the usage environment and how you feel, objectively, you may become concerned about the noise as the sound signal volume increases when you use this product. In addition, it may be caused by a defect in the phantom power of the connected audio interface, so noise may be noticeable depending on the usage environment and connected equipment. Please lower and adjust the sound signal volume of the device you are using and check if the noise decreases. - If there is no sound, please check that (1) the phantom power supply switch is turned on, or (2) that the cord that can supply phantom power is connected. - If you have any other usability issues, please provide us with details of the issue, usage environment, type and specifications of the equipment you are connecting the product to, and we will advise you on how to deal with it.
Introducing the features of this product.
